Championing the
Changemakers

Hi all!

A couple years ago now there was an incredible thread here about circadian lighting design and WELL. There was a lot of dipping toes in the water with intent to gather lessons learned and report back.

What have been the high points and low points of circadian lighting design so far? What seems cost-effective and worth... Read more

Anyone have experience with electric boilers? I think in cold climates it's perhaps the first thought when trying to reduce scope 1 emissions in an HVAC application that would have historically used gas-fired boilers... but it seems like they're only an incremental improvement compared to heat pumps / geothermal / VRF type solutions. We haven't... Read more

Buck Dodgers

For my first test post I'm going to be completely boring and ask about logistics.

If we know of someone that should be part of this forum, how do we invite them? There were a couple of people that I thought were on the Wiggio who I recently found out were not. There may also be folks from our regional groups who may not have been part... Read more

Hi everyone,

I'm interested in identifying any in-person opportunities (local to Greater Boston) to engage my office during Earth Week. We are all excited to be able to do things in person now, so if anyone has anything on their radar please let me know (a panel, educational activity, or volunteer opportunity!)
 

Thanks,... Read more

Welcome to the quiz portion of Avoiding the Global Warming Impact of Insulation.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define “embodied global warming potential” and “lifetime global warming potential” as they relate to insulation materials.
2. Describe why some... Read more

Welcome to the quiz portion of Innovative Products and Technology from the Greenbuild Expo

Learning Objectives
Upon completing this course, participants will be able to:


1. Direct attention to green building products and technologies that show exceptional potential, from a whole-systems perspective, to bring the... Read more

Hi everyone, 

We’re happy to officially announce some big news you might have heard about on our monthly calls: as we wrap up 2024, we will be transitioning to a new platform for our Peer Networks Hub! 

Instead of finding the forums, member directory, and all other Peer Network resources on BuildingGreen.com, you will be able to... Read more

Can you comment on successful ways you have used eQUEST and pitfalls you have seen? We are considering training our architects to use it for early building analysis on all projects. 

I have been watching LEED Zero for a while, and have appreciated certain things, but one thing I think is an absolute disaster is their allowance of mainline RECs for claiming Zero Energy and Zero Carbon performance.  I just asked this question on the LEED Zero webinar, and the panelist basically said, "it's part of LEED Zero, therefore it is... Read more

Hi All - 

Has anyone explored hydronic system analysis software (1D CFD)? 

Some options are PipeFlo, AFT Fathom, PipeFlow (eerily similar name to first option), COMSOL Pipe Flow Module. 

Applications could range from general system troubleshooting, pump sizing, to district hydronic system network analysis. 

Best,... Read more

Hello - I have met several of you virtually over the last couple years. My name is Megan Zack and I am excited to share that I have changed positions and will be the Cheif Sustainabilty Officer at Wight & Company. After spending the last 20 years working as an architect with a small percentage of my time dedicated to sustainabilty, I'll be... Read more

Has anyone had a Contractor track GHG emissions during construction? If so, any advice on how to include that in the project specifications?

Thanks!

Yarden

Hello all,

Could any of you point me out to recent studies showing the health impacts of plastic piping vs. copper piping? 

We have a project where NIRON or Aquatherm are proposed as a VE item in lieu of copper.  I know there is some studies showing PEX and PVC piping health impacts, but I can't seem to find anything on these 2... Read more

There are a number of clear finish options available, from natural oils and low-toxicity products primarily used on residential woodwork through factory-applied finishes where specific aesthetics and/or added durability are required (such as those used on cabinetry or commercial architectural millwork). Many of these have very high VOC levels,... Read more

Lake|Flato developed a project process road map as an internal project management tool over a decade ago, and we're looking into updating it.  It serves as a sort of "checklist" of major design, sustainability, and QA/QC milestones for each project phase.  I know we've talked about similar tools at other firms at past SDL summits, so wanted to... Read more