Championing the
Changemakers

Hi all-

We are dabbling in developing an official research component of our firm. We have collaborated with a class at a local university and are looking for ways to take our research to a higher level. I'm curious how some of the other firms doing design or building technology research approach the process. For instance, do you have a... Read more

Hello SDLs,

I'm fairly new to the group, joined in November and I must confess to being a total wallflower here, having gone almost 6 months now without introducing myself. I am an Architect with Dyer Brown Associates in Boston, MA where I head up our firm's sustainability efforts, as well as devote a fair amount of time to '... Read more

Green gurus!

We're getting some interest from clients abroad on two specific materials which we don't have experience with here in the U.S.:

1) Cross Laminated Timber (CLT)

and/or 

2) CarbonCure concrete

Anyone willing to share lessons learned on these material either here in the forum or offline? Or point me... Read more

Hello- If you use Procore....

Are your jobs using a template to conduct and create "reports" of their IAQ inspections? Did you set it up in forms or inspections? Would you mind sharing an example template with me? I know Green Badger has a great app to do this, which we use. We would use inspections in Procore for jobs that are not using... Read more

Hi, Green Gurus!

We have a great opportunity available at SERA for someone to join our sustainability team as an Integrated Design and Certification Specialist. Details are posted to our website: https://www.seradesign.com/careers/
Could you please share with any good candidates that you think might be interested. And of course, I’... Read more

Hey everyone, 

With the coming In-Use Off-Road Diesel-Fueled Fleets Regulation | California Air Resources Board we have been doing some research on availability of R-99 fuel prior to the January 1 start date. One thing we aren't finding in the research is an estimate of cost impacts. Has anyone started rolling out R-99 on their sites yet... Read more

I am diving back into Sefaira for the first time in a while, and the program still seems to be missing the ability to account for automatic daylight dimming in energy savings. Previously I had used an LPD reduction equivalent to emulate the savings automatic dimming would provide. Has anyone done a similar work-around? 

I wanted to make sure that everyone saw this.   Next Friday is a launch webinar for the Commitment.

Introducing the Contractor’s Commitment       November 13th, 2020          3pm - 3:30pm ET (12am - 12:30pm PT)

This webinar will mark the launch of the Contractor’s Commitment as a pilot program for 2021. We’ll give a brief overview... Read more

Welcome to the quiz portion of Cladding: More Than Just a Pretty Façade

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how different commercial wall assemblies handle moisture.
2. Know what questions to ask to determine a cladding system's environmental impact.... Read more

Dear SDL community,

I am supporting one of our health authorities in developing a business case for regenerating healthcare infrastructure as part of the indicative design for a new hospital and cancer centre. While I will be deepening this inquiry through the lens of a PhD over the next few (hopefully 4 or less!) years, I - and we - are... Read more

CEUs are available for reading our entire plumbing guide. Click here to learn more and take the quiz.

Excess heat generated by air conditioners, refrigerators, boilers, and water flowing through pipes typically goes unused.

BuildingGreen-Approved Water Heat Exchangers

BuildingGreen lists desuperheating technologies and... Read more

Hello all, there has been a fair amount of discussion about the emerging Cove Tool for early stage energy modelling and parametric optimization at our firm. I am very curious if any of you are using this software, and if so, what are your thoughts about it? 

https://www.covetool.com/

Thanks,

Esteban Matheus

Hello Folks,
What is your experience with successes and failures in the design process? As a starting point I have listed my Top 5 for success, and my Top 5 for failure. We'd love to see your reactions and look forward to the discussion when we all meet next week at our monthly check-in.

Top 5 reasons for when integrative design... Read more

Greetings Gurus!
Please sign up and spread the word (even if you can't attend, sign up and get follow up info!)

This is one of a series of Hackathons to crowdsource alternative design details that are intentionally meant for disassembly! The outputs are meant for public consumption so that anyone who doesn't have time (that's... Read more

I am very interested to understand the deployment of LED temp jobsite lighting on a national level.  I think this all goes back to the low emitting jobsite.

1. Does your firm utilize temp jobsite lighting on your projects?  

2. Is this every project or a percentage of projects?

3. In your state or area is it prevalent, one... Read more

Hi all - many of you have been involved in our project to crowdsource the best building performance graphics and make them searchable and freely available. After redesigning the website for functionality and bi-monthly (instead of annual) competitions, we are launching our first of these Challenges: Daylight + Glare. Upload a graphic or three,... Read more

I'm looking for successful examples of net-zero, Living Building, or similar office buildings that are NOT owned by highly-motivated organizations like RMI or the Bullitt Foundation (or one of your firms).

We are looking to team with a developer on a small-mid-size office building that will house our new office with us as a tenant (no... Read more