Championing the
Changemakers

All,

I recently met Sahil Tadwalkar who is a Stanford MS Candidate in Civil Engineering. He and his group are interviewing design and construction industry professionals to understand issues and challenges around specifying and using low carbon solutions on projects. Interesting stuff! I encourage you to contribute by setting up an... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Glazing connects occupants to the outdoors, but with so many opportunities for air leakage, poor insulation, and thermal bridging, glazing is the primary weak link in building energy performance.

BuildingGreen approves glazing that offers strong energy performance properties for a variety of... Read more

Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

Hi all, 

I'm excited to announce that LHB (my 250-person multidisciplinary firm located in Minnesota and Wisconsin) is hiring a full-time Regenerative Design Leader. I thought this might be helpful for those of you looking for example job descriptions for your own postings, or if you are looking to make a move (we do have an office in... Read more

Hi Everyone, 

Our Vancouver team is looking for some innovative, high performance  building retrofit case studies. We are have been retained to retrofit a significant heritage building in Vancouver and the client has a net zero carbon institutional goal. As such we are looking for some innovative precedents that will provide design and... Read more

Faucets with high flow rates waste water—not to mention the energy used to treat and deliver it to our buildings—and the additional water stresses our wastewater treatment systems.

Following the summer SDL summit - we formed a spinoff user group called "Carbon Sync" to discuss Life Cycle and Carbon Assessment tools like Tally and Athena.  We've had three successful calls with folks sharing a couple 5-minute presentations about various studies and explorations.  We have a mix of experience levels - but are collaborating... Read more

Hey all,

We have a NAVFAC project going into construction that has indicated that they'd like to hire someone to help them with the construction tracking aspects of the UFC requirements, including the Guiding Principles Assessment (GPA) program through GBCI. We're on the design side, so cannot offer these services on our own project;... Read more

All,

The current version of the program manual includes ID numbers for the best practices, as shown below. I know we want to keep a quick reference number or ID, but though it would be worth asking if we want to use the below, reorder them in some way, or use a different kind of ID. Opinions?

Thanks,
Jenny

--------... Read more

Hi SDL Group -

Moody Nolan is actively seeking a new hire to help support our sustainability needs!

If you know of any interested parties, please have them visit the Moody Nolan webpage and select 'Careers' at the bottom of the homepage. Our available position is listed as the 'Sustainable Design Facilitator' role.  http://... Read more

Hi everyone,

I’d like to invite you to join this Friday’s webinar hosted by the Embodied Carbon Network: Using Whole Building LCA to Reduce Embodied Carbon within LEED and Beyond, and to follow up with a tool that I presented at this summer’s Architecture SDL summit, which ZGF has now upgraded and made free to the industry at large.... Read more

Hello, All!  I'm hoping for your help to keep a green roof on a project of ours.  We have a large healthcare project in the Midwest that is coming in over budget.  To avoid losing our extensive green roof, I'm looking for alternate sources of funding - grants, private sources, etc.  Has anyone gone down this path before and have shareable... Read more

Hi,

Has anyone used a sustainable product that complies with the EQc Low-Emitting Materials requirement that is a general construction adhesive similar to Liquid Nails? I've checked the Mindful Materials website and can't find anything. I found Red Devil General Prupose Construction Adhesive on UL Spot, but have never used it before. Any... Read more

Hello SDLs!

Here is the 2018 SDL Summer Summit Report, ENJOY!

In a couple of weeks we will share this report with the broader Green Gurus group. 

We are also working on setting up a webinar to present the 2018 SDL Summer Summit Report and discuss the Summit!

All the best,

RoseAnn

Hello Sustainable Construction Leaders,

It's come to our attention that although we shared the slides from last fall's all-network Show & Tell in Atlanta, we neglected to include the presentations from the SCL Summit itself. Since we believe in "better late than never," here they are!

As a reminder: we have permission from... Read more