Championing the
Changemakers

This is something I have been tracking since last year. The same or similar bill was introduced in 2022 but failed by one vote. This would mandate carbon reporting for any company with revenue of $1B or more AND which does business in California. Unlike the upcoming SEC reporting requirements, this would apply to both private and public... Read more

The Winter Summit participants have had this for a few weeks now, and no one has screamed about anything being inaccurate, misleading, or too revealing, so it's time to share the latest Summit report more widely. 

Per our long-standing policy, this report can be shared outside our "safe space"--it's a great way to share the wealth of... Read more

Stone was one of humanity’s first building materials and continues to play an important role in today’s green building industry. There are many stones used in the building industry, but the most common ones used for exterior cladding are limestone, granite, marble, slate, and sandstone.

BuildingGreen-Approved Stone and Masonry Cladding... Read more

We are cautiously rekindling the age-old debate: how are we balancing modeling software for design /visualization and performance analysis during early phase of design.  

We are heavy SketchUp users for early design, and most of our staff have access to COVE tool for early performance analysis. Problem is, I’d rather use Revit to COVE... Read more

Biophilic design features are not just aesthetically pleasing; researchers have found that patients heal faster, workers are more productive, and children learn better when more elements of nature are present.

And yet there are still very few projects developed today that inspire a connection to life and the natural world. Some people... Read more

We're wrapping up a multi year project that went through multiple design changes, leaving us with a ton of material samples.  Does anyone know of a good place we could donate these samples to, to keep them out of the landfill.  I'm in the greater Seattle area.  Thank you for any suggestions.

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Hi all,

We're seeing more interest and desire for outdoor work spaces, and as we consider the design implications around working outdoors, teams have been asking about wind comfort. We've tested Ingrid Cloud and now SimScale. I'm curious if anyone would recommend any other CFD tools that are geared toward architects? Also curious if... Read more

Ada Fran Maman

Welcome to the quiz portion of Engineering a Wood Revolution

Learning Objectives
Upon completing this course, participants will be able to:


1. Compare engineered wood to steel and concrete; and describe how engineered wood offers better dimensional stability, less waste, and more consistent performance than... Read more

If I'm remembering correctly, someone at the summer summit mentioned working on / or being familiar with the Berkeley CA gas ban. A town here in MA is also considering a ban and wanted to get some feedback from Berkeley.

Hi all,

Just like many of you, our firm is dedicated to increasing representation in the professions and through its relationship to the AIA Large Firm Round Table was able to access a National Organization of Minority Architects Fellow this summer. We’re loving our work with Himesh thus far, but it’s unclear whether we have the workload... Read more

All,

I'm sure a few of you attended our recent  webinar on the LEED v4.1 LCA webinar. In case you missed it, the recording is posted. We were stunned by the amount of engagement from the audience; we allotted 30 minutes for questions and I think it went even longer. The webinar recording should be a great starting point for anyone... Read more

I give you... the content-ready site. The editors should be able to start adding Best Practice content.

Development site: 
https://live-bituser.pantheonsite.io/

Instructions (with tutorial videos):
https://docs.google.com/document/d/1EUIzitkW0CczFQo8V2q3gVDVO4Juk4EI9iv8...

I created accounts for all the editors... Read more

Dear all,

A mechanical engineer on a healthcare project we are working on has asked for help in dividing the ventilation calculations between ASHRAE Standards 170 and 62.1; can anyone here help shed some light on it?

"This is the first time I am working on LEED for a hospital and I am not sure how the template wants me to show... Read more

I'm exploring the use of phase change material for a project. Specifically, looking at the BioPCM/ENRG Blanket product. I see on their website that ZGF used it at University of Washington. I'd love to hear any feedback from folks who have used it, and more specifically how your energy model and MEP engineer accounted for it. Thanks!! https://... Read more

EDITED LINK

Hello, below is a link to our newly uploaded research report, Embodied Carbon in Commercial Furniture. This new research report introduces a case study and some new baselines for measuring the carbon footprint of commercial furniture, to add to a growing body of work on this topic among our peers:
Embodied Carbon in... Read more