Championing the
Changemakers
BuildingGreen champions the changemakers in sustainable design and building, with trusted insight, unparalleled education, and communities that are transforming the industry.
Log in to your profile
Image: Piranka
Forum topic
My colleague, Kira Gould, from the AIA National COTE communications committee, has a great question I am reposting here...
AIA National COTE: In the early 00s, COTE supported an initiative through which we created a Guide to the Green RFP and collected sample RFP language. That now dated guide is no longer findable in our resources and... Read more
Forum topic
Hello all,
Many of you have been asking about the CC reporting template for 2023 projects. It is still in-progress, but we can promise a huge upgrade from the past couple of years. In particular, the new template is designed for ongoing project tracking over the course of the year (rather than purely documentaion after the fact). ... Read more
Forum topic
Sorry this is last minute but it just came to my mind to share this as I am looking forward to this roundtable which is happenging Wed, July27th from 12-1pm EST.
The Built Environment Plus Women in Green Roundtable is hosting some amazing women in the industry who are working on DEI issues for a panel discussion. The conversation... Read more
Forum topic
All -
We have corporate clients that are starting to request antimicrobials in response to Covid-19. I assume we are not the only ones seeing an increase in these requests. Knowing that the evidence supporting antimicrobials has limited to no efficacy, how are you approaching these conversations? We want to continue to advise based on... Read more
Quiz
This summit was pre-approved for 3.5 AIA LUs and 3.5 GBCI CE hours.
Please complete the survey questions to confirm your attendance and receive your CEUs.
By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please check your profile to be sure your... Read more
Forum topic
Dear all,
On a major renovation where the wall R-value/U-value needs to be brought up to energy code, specifically a mass wall situation, does anyone have insights on how the situation is best dealt with? On the project in question for me, the continuous insulation might have to be added to the inside surface of the mass wall and there... Read more
Forum topic
As I mentioned in my five-minute presentation this morning and then discussed a little more in the break-out on RELi that followed, the full RELi Rating System, in its current form, has now been posted online: http://anyflip.com/zyqc/mdir/
Unfortunately, this is only posted as a flipbook, currently (viewable online only), and isn't... Read more
Forum topic
I'm wondering if people are seeing any increase in WELL or Fitwel certification interest? Or any other 3rd party systems aimed at health and wellness? WELL seems like a higher bar and now WELL v2 offers more flexibility. Is interest and adoption of 3rd party health and wellness certs growing?
Forum topic
Hello Green Gurus,
Here is the information for this month's Peer Networks Webinar, Making the Case for Equity with Data: a Free Tool for Project Teams. We hope you will join us!
Register HERE.
Making the Case for Equity with Data: a Free Tool for Project Teams
Tuesday, July 27th, 2021
1pm - 2pm ET (10am - 11am... Read more
Basic page
This page contains our full User Agreement.
This Agreement sets forth the terms and conditions for your use of all webpages under both the BuildingGreen and LEEDuser names and domains, published by BuildingGreen, Inc. (collectively, the “Site”), including The BuildingGreen Report (formerly Environmental Building News) and BuildingGreen... Read more
Quiz
Welcome to the quiz portion of Behind the Logos: Understanding Green Product Certifications.
Learning Objectives
Upon completing this course, participants will be able to:
Explain certification basics: standard development, the degree of separation between the certifier and the company whose product is being certified, and... Read moreSpotlight Report
Older buildings—especially those from the 1950s, ’60s, and ’70s—need our help. Many leave something to be desired in terms of aesthetics and comfort. But the truth is that they are part of the urban and suburban fabric now, and they aren’t going anywhere. As tempting as it might seem to tear them all down and replace them with high-performance... Read more
Forum topic
Hi folks,
Here's the next Peer Networks private webinar. As usual, it will be recorded and shared in the network if you can't make it in person:
Thursday, July 18, 2pm EDT (11am PDT)
The Center for Active Design (CfAD), operator of the Fitwel Certification System, recently launched Fitwel v2.1, which advances a vision where... Read more
Forum topic
Hello good people and fabulous troublemakers,
PFAS is in everything. In May, the NY Times published an article about this, along with the governments work to remove it from drinking water. https://www.nytimes.com/2024/04/10/climate/six-things-to-know-about-forever-chemicals.html
As you may know, a working group has been gathering... Read more
Forum topic
I am wanting to take the pulse of this group on behalf of a manufacturer who has asked us a similar question.
The company in question makes wood products and has had FSC CoC for over a decade. Recently, they are encountering issues with sourcing FSC for about 50% of the wood species they offer. There just aren't FSC sources available.... Read more
Forum topic
Mark your calendars! Wednesday March 9th, 3-4pm ET (12-1pm PT) - Sustainability Leaders State of the Regions.
We’ve seen a lot of momentum building around the potential for regional Sustainability Leaders groups, and we want to learn how best to support this activity. On this call, we’ll have a few currently active regional groups share... Read more
Product Guide
Metal windows are used in commercial building because of their durability, low maintenance, and ability to handle wind loads.
BuildingGreen-Approved Windows
Metal windows must achieve an NFRC-certified unit U-factor of 0.20 or lower to be approved by BuildingGreen.
Manufacturers also must demonstrate that their highest-... Read more