Championing the
Changemakers

I am looking for a Mechanical Engineering firm in New York state who works in mid-sized commercial (ideally hospitality or multifamily experience) and who has experience with geothermal GSHP systems.

Hi folks,

A press release about this just showed up--most of what they're including in their "Clean Construction Declaration" involves reducing embodied carbon in materials, but they're also calling out construction equipment:

"Procure and, when possible, use only zero emission construction machinery from 2025 and require zero... Read more

Will you be at Greenbuild in Chicago? Stop by BuildingGreen/LEEDuser booth #1522 for informal conversations with guest experts and BuildingGreen editors. You are encouraged to RSVP and add the meet-ups to your calendar, but not registration is not required.

WEDNESDAY NOV. 14

10:45 AM - 11:15 AM
Dan Winter, Neil... Read more

Medium-density fiberboard (MDF), particleboard, and interior-grade plywood can emit formaldehyde, a known human carcinogen. Some materials  come from non-sustainable sources.

BuildingGreen-Approved Panels

Products meet California Air Resources Board (CARB) ultra-low emitting formaldehyde (ULEF) or no-added-... Read more

Hi all - we have several projects where money from the IRA may be able to get projects farther. I've seen the AIA/USGBC webinar and done some other research as well. Does anyone know if there's a Higher Ed group that is chasing down how and when the money is available and for what exact purposes? Are you planning on using consultants to help... Read more

...for all the folks on the west coast.

It’s smokey out there. For anyone looking for a cheap and relatively effective way to clean your indoor air, here is an article on a DIY box fan filters. 

https://www.texairfilters.com/a-variation-on-the-box-fan-with-merv-13-filter-air-cleaner/

This PSA is from our friends at NEEA (... Read more

We have an environmentally-minded client who asked us to look into an alternative to the blue adhesive film that is typically used to seal uninstalled ducts for IAQ purposes. From a human health and waste perspective, they were hoping to find something that was both plastic-free and reusable. Has anyone tried out other options? I thought it was... Read more

Following my retirement from BuildingGreen, I’m also looking to retire from the nonprofit Resilient Design Institute, which I’ve been leading since 2012. My default plan is to sunset the organization in the fall of 2024, but I wanted to offer the idea of someone (or multiple people) taking over the organization.

RDI is incorporated as a... Read more

Hi folks,

We're kicking off a new way for us to collaborate as a network: monthly web-based conference calls. The first one will be on Friday, Nov 15 at 1:00 eastern time. The topic will be "Sustainability and the Small Firm: Practices in Transition" -- which is the name of the proposal James has submitted (and gotten first-round... Read more

Hi folks,

It came up on the Regional Leaders call this week that many people aren't aware that we added a link to the BuildingGreen Communities in footer of BuildingGreen.com. So if you want an easy way to get to the forum page, other than clicking on a link in an email, there it is! (Thank you, Stephen Endy!)

The footer has a... Read more

Welcome to the quiz portion of Energy Modeling for Early Design Decisions (recorded webcast)

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how energy codes and standards are pushing commercial projects beyond what they can do without modeling.
2. Describe the key... Read more

Hi folks,

I’m sure most of you know Gail Brager, or at least know of her. For those who don’t, she helps run UC Berkeley’s Center for the Built Environment and is a long-time champion of all the things that make buildings work for their occupants. Perhaps most notably, she was a co-author of the Adaptive Thermal Comfort option in ASHRAE... Read more

Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon construction, however, may be less familiar. 

Contractors are just... Read more

The 2018 ENR Green Building Survey is due March 16th.  I'm sure you all know the metric they use to evaluate your ranking is solely the revenue from projects pursuing a green building certification in the previous calendar year.  Personally, I think this totally bogus.  How "green" a contractor is may correlate with how much revenue they have... Read more

A couple questions for this group. I know we're having a Green Commons meeting on this next week. But can anyone comment on the following questions?

-Have you or your firm split the benefit of the 179D with a client? Is this typical?

-Is prevailing wage a requirement for all 179D benefit, or does it follow the same lines as... Read more

We had so much fun at our Contractor coffee talk that I reached out to our MEP friends to see if they would set up something similar.  And they have agreed to host a talk on Thursday December 2, at 1-2pm EST.  They will talk about decarbonizing buildings, on a schedule that keeps us under the 1.5° C limit and will also address strategies for... Read more

EDITED LINK

Hello, below is a link to our newly uploaded research report, Embodied Carbon in Commercial Furniture. This new research report introduces a case study and some new baselines for measuring the carbon footprint of commercial furniture, to add to a growing body of work on this topic among our peers:
Embodied Carbon in... Read more

The current Stantec/BuildingGreen featured topic is Material Health. Read on to learn the essentials, and then dive deep to earn CEUS.

Also see the Resilient Design featured topic, and also a survey of topics trending in Stantec’s regions.... Read more

Fellow SCLers,

This is a small ball item, but I recently had a conversation with a safety glove manufacturer called Traffi. They make PPE, but in particular they have a line of gloves that they promote as carbon neutral. Their organization's operations are offset with retired RECs, but one line of their gloves, LXT, is offset by a... Read more