Championing the
Changemakers

HI All,

Really hoping to get some insight from all you wonderful people on how the Sustainability teams are set-up in your construction companies. As mentioned in my introduction post, I am the first ever Sustainability Engineer hired by my company.....until now all the work was handled by project teams. Which worked for them in the... Read more

There has been a lot of discussion re antimicrobials in this group, so here is a pre-release of this month's article on the topic. It's not an extensive feature, but I hope you find it informative.

Brent

The BuildingGreen Guide to Thermal Insulation provides detailed guidance on insulation products and practices, including recommendations on what insulation to use and what to avoid. It's a treasure trove of information for architects and designers, builders, and anyone who is actively considering the impact of insulation on the quality of your... Read more

I am excited to share with you the final draft of the letter back to LP50 manufacturers.  The LP50 manufacturers sent their “Closing the Loop on Product Transparency” to design firms earlier this year.  For more background information, please check out Chris Hellstern's original August 20th post on this Green Gurus forum.  When we posted the... Read more

Folks,

In case any of you enjoy the Phoenix weather, I wanted you to be sure to know that our company, Sundt, which is headquartered here is looking for a sustainability director to lead up our efforts. This comes after two years of work and hiring a consultant (Brightworks out of California) to help us prepare and take the next steps. I... Read more

SAVE THE DATE: ALL Peer Networks Show & Tell
Tuesday, November 19 | 8pm - 10pm
The Kendeda Building, Georgia Tech | Atlanta, GA

Start your time at Greenbuild on a high note!

Join your Peer Networks Colleagues from SDL, SCL, MEP, SDLS, and SAL for a high energy evening full of lightning round previews of the best... Read more

All--

I haven't been part of this group in a while, but I'm excited to have rejoined recently. Some of you know that I joined HMC last year as Chief Impact Officer. I oversee design, sustainability, research, and communications for the firm, which has 300 people in 6 offices in California. We were founded in 1940 with a mission to serve... Read more

Do any of you have experience with Design For Freedom yet? It came to my attention and I'm trying to investigate. I would love to hear feedback and experiences that you may have at this point. It seems like an opportune moment for this issue of forced labor (yikes! so much I don't know...) to come to the forefront, and I'm curious to hear how... Read more

I was asked to share this with my network...

"For colleagues working with LCA data, during design, construction, or facility management proces, please help us understand how EPDs are useful in your processes by completing the survey below:"

https://www.linkedin.com/posts/ashrant-aryal-2354497a_qualtrics-survey-q...

Sustainability leadership has requested that you take this quiz to help assess sustainability literacy across the firm. Your own results will be presented to you at the end of the quiz but will not be shared with anyone else. Only aggregated, anonymized results will be available to others.

Please don’t do research to inform your... Read more

BuildingGreen recommends low-emitting acoustic ceilings that do not contain formaldehyde resins or PVC coatings. Look for those that have C2C Silver or Gold certifications, are Declare Red List Free, and are third-party certified for low emissions using CDPH Standard Method. We also prefer wood ceiling products with FSC certification. The... Read more

Welcome to the quiz portion of The Death and Rebirth of DC Power. 

Learning Objectives
Upon completing this course, participants will be able to:


Explain when and how to integrate DC power into buildings, and the benefits of doing so.

Understand the history and background of AC and DC power in the U.S.

... Read more

Are you or companies considering joining RE100? http://there100.org/going-100

"Companies joining RE100 make a global, public commitment to 100% renewable electricity.

To achieve this goal, they must match 100% of the electricity used across their global operations with electricity produced from renewable sources – biomass (... Read more

Hi All,

Polling the group to see if anyone has experience with Simergy - an e+ based modeling tool?

The tool appears to have features and integration with a lot of e+ plugins that make it attractive - but i haven't heard of its widespread use.

Is anyone successfully using Simergy?

Hello All,
Checking in on experience with Armstrong's Tectum E-N with NEOPOR Graphite polysytrene GPS rigid foam insulation core in roof panels for exposed structure?
BASF says that NEOPOR uses up to 30% less material than other rigid foam; it is greenguard gold cerified. 

Interesting that the NEOPOR increases in R-value as... Read more

Hi All,

USGBC MA is doing a study on the cost of net zero energy buildings in MA.  I’m wondering if you all have any data to share on plug loads in ZNE projects. I’m looking for single family res, 2-4 unit residential, +/- 60 unit residential, 10-12 story office, and k-12.  The engineers have presented initial results and their... Read more

Hey team,

I'll go look to see who's in the MEP group, but does anyone in this circle have a northern California design engineer for institutional work that they'd particularly recommend? A group of folks we're engaged with is apparently having difficulty identifying a California-based MEP that everyone universally likes for high-... Read more