Championing the
Changemakers

Sign up now to roll up your sleeves and have fun solving real problems! April 28 from 3-5pm ET

DESIGNING FOR DECONSTRUCTION

Building deconstruction, or disassembly, is a critical strategy for carbon reduction, minimizing waste & contributing to a circular economy, yet remains a serious challenge for many reasons.

Many... Read more

What do you specify for the laboratory countertop? Are there any healthier options I should suggest to my team? Thank you!

People tracking pollutants and dirt into buildings can cause indoor environmental quality (IEQ) problems, increase maintenance costs, and reduce the life of the floor. When they track rain and snow on hard surfaces, it increases the risk of personal injury due to slips and falls.

BuildingGreen-Approved Track-Off Systems

... Read more

I looked through the forums and was surprised to see that from what I can tell this 2018 article from Yale I'm going to share here has not been discussed previously.  It basically says that FSC is not trustworthy, ineffective, and greenwashed, as critiqued by the likes of Greenpeace and others.

I would like to hear from someone in the... Read more

As I mentioned in my five-minute presentation this morning and then discussed a little more in the break-out on RELi that followed, the full RELi Rating System, in its current form, has now been posted online: http://anyflip.com/zyqc/mdir/

Unfortunately, this is only posted as a flipbook, currently (viewable online only), and isn't... Read more

Welcome to the quiz portion of Saying Goodbye to the Office—and Hello to Housing!

Learning Objectives
Upon completing this course, participants will be able to:


Hello - Other than hiring an acoustic consultant, I am wondering what in-house tools you are using internally at the design stage for modelling acoustic performance? 

Thanks, Mona

Dear all,

On a major renovation where the wall R-value/U-value needs to be brought up to energy code, specifically a mass wall situation, does anyone have insights on how the situation is best dealt with? On the project in question for me, the continuous insulation might have to be added to the inside surface of the mass wall and there... Read more

Hello all, 

Our firm recently signed onto the Material Pledge and while there is no reporting requirements at this time we are wondering how other architectural firms are, or plan to, report projects. 

Thanks for any insight that can be shared!

-Dave

Welcome to the quiz portion of Resilient Design: 7 Lessons from Early Adopters

Learning Objectives
Upon completing this course, participants will be able to:


1. Recount the ten resilient design principles.
2. Recount each of the seven fundamental messages embraced by the model practitioners.
3. Describe... Read more

Hi All,

We are trying to make a case for hiring a full time sustainability specialist in our firm, and one of the arguments we want to use is that the ratio of sustainability specialists vs the ratio of full time employees in our company is quite low. That being said, I want to have an understanding of where other firms stand with this... Read more

Dear SD Leaders,

As some of you may have heard, EHDD has been working for the last year in developing a data model to support early phase goal setting for holistic low carbon design. This data model is at the heart of our Early Phase Integrated Carbon (EPIC) assessment tool. EPIC is a data-driven goal-setting tool for use in the earliest... Read more

I am wanting to take the pulse of this group on behalf of a manufacturer who has asked us a similar question.

The company in question makes wood products and has had FSC CoC for over a decade. Recently, they are encountering issues with sourcing FSC for about 50% of the wood species they offer. There just aren't FSC sources available.... Read more

I'm teaching a LEED GA study group and was rambling on the differences between CIR and precident-setting LEED Interpretation (that gets posted in the addenda library and all). Then I went onto LEED Online and was showing how those are submitted... but can't actually figure out how a LEED Interpretation would be submitted. Has anyone done this... Read more

There has been a lot of discussion re antimicrobials in this group, so here is a pre-release of this month's article on the topic. It's not an extensive feature, but I hope you find it informative.

Brent

Hello SDL Network,

I am working with members of the Seattle AIA COTE in planning an event that we are tentatively calling "Pathways to Decarbonization" or maybe "Decarbonization Success Stories".  The idea is for the COTE to identify entitities (school districts, local governments, higher-ed institutions, corporations, etc.) that have... Read more