Championing the
Changemakers

Hello all,

I am reaching out to this community as SMMA has a job opening for a Sustainable Design Analyst (like many of you recently posting job openings on this forum).

Here is the job posting link: https://smma.applytojob.com/apply/mah0aDkOJ0/Sustainable-Design-Analyst

Please note that this position will support... Read more

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Hi all,

I wanted to reach out to fellow MEP energy modeling teams to assess everyone's experience with the new PCI calculation methodology in 2016. It was a substantial change in how we show savings on projects. Big changes can often come with un-intended consequences. I'm all for pushing to higher efficiency - just want to make sure we... Read more

I am looking at having staff members take a materials course and deciding between Parsons Healthier Materials and AIA Materials Matter certificate programs. Does anyone have feedback on either? Bonus points if you know about both and can provide a direct comparison. Thanks!

Hi everyone,

As designers who sometimes work in the field of healthcare, we occasionally like to gather data about both current attitudes and future possibilities. Steffian Bradley Architects would greatly appreciate your participation in our 2018 survey by completing the questionnaire linked below.

All responses are anonymous to... Read more

Hi All,

I wanted to pass on a few cool things we have going on at Built Environment Plus (formerly USGBC MA)  I really am conscious of not spamming you often and reserve posts for some of our most exciting happenings.

August 5, Building Tech Forum/MaterialsCAN: Getting to Zero with Embodied Carbon. Featuring 13 5-minute... Read more

Design assemblies that live up to their potential Course developer Peter Yost explains how high-performance assemblies are fundamentally different from traditional building assemblies.

High-performance buildings integrate site-responsive orientation, climate-responsive form, hefty R-values, efficient mechanical systems, healthy... Read more

Hi all,

AGC is the biggest umbrella organization for general contractors in the states. To date, there has been practically no interaction between the SCL and AGC. In my mind, the SCL group is the most knowledgeable group of dedicated sustainability professionals out there; so is there a way that we can partner with AGC to collaborate ... Read more

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Welcome to the quiz portion of Choosing Windows: Looking Through the Options.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Choose a frame material based on its structural characteristics, thermal insulation, durability, maintenance requirements, cost, and effects on the... Read more

Hello Green Gurus,

Here is the information for this month's Peer Networks Webinar, Making the Case for Equity with Data: a Free Tool for Project Teams. We hope you will join us!

Register HERE.

Making the Case for Equity with Data: a Free Tool for Project Teams
Tuesday, July 27th, 2021
1pm - 2pm ET (10am - 11am... Read more

Hello Green Gurus,

Here is the information for August's Peer Networks Webinar, A more Mindful Future: mindful MATERIALs plans for Digital Transformation through the Common Materials Framework. We hope you will join us!

Register HERE

A more Mindful Future: mindful MATERIALs plans for Digital Transformation through the Common... Read more

Hello - Other than hiring an acoustic consultant, I am wondering what in-house tools you are using internally at the design stage for modelling acoustic performance? 

Thanks, Mona

Jason F. McLennan

Hi folks,

We’re working on the agenda for what’s shaping up to be a really awesome Summer Summit at a great new venue in Massachusetts. There is an awesome group already registered, and we’d like to fill the remaining slots soon so that we can develop the agenda with your input.

If you’ve been planning to register, please do it... Read more

Hello all, 

Many of you have been asking about the CC reporting template for 2023 projects. It is still in-progress, but we can promise a huge upgrade from the past couple of years. In particular, the new template is designed for ongoing project tracking over the course of the year (rather than purely documentaion after the fact).  ... Read more