Championing the
Changemakers

Welcome to the quiz portion of Existing Buildings Are Architecture’s Future!

Learning Objectives
Upon completing this course, participants will be able to:


Explain why existing buildings are typically environmentally preferable to new construction. List six things an assessment of building reuse should include. Describe four... Read more

Hello All,

A group of us (three architects and a builder- sounds like there should be a joke here) were debating this and we  are stumped.

Application: Residential exterior trim.

50 year warrantied composite product of agricultural byproduct with PVC (EPD not published yet) vs 100 year (if primed on all sides and painted or... Read more

Hi All,

Structure Tone just released their annual Sustainability, Resiliency, and Wellness Report.

Download a copy here.  https://structuretone.com/sustainability/

I’m curious what people think.

We're hiring: Join our dynamic team as a Sustainablity Coordinator at Structure Tone Southwest!
APPLY NOW!

Posting is listed for Dallas, but we're open to Austin, Houston, and San Antonio.

Are you passionate about sustainable building practices and wellness in the built environment? Join our team at Structure Tone Southwest... Read more

Hi all! I'm very excited to report that we have interest from a developer client in tracking embodied carbon through construction. We have issued construction documents and the construction managment team is begining the process to establish the GMP.

We're looking to use EC3, and/ or ZGF's LCA analysis tool for concrete to look at how we... Read more

I'm passing on an alarming (and truly Orwellian!) message from the AIA that some may have received:

The AIA is aware (and has been actively addressing) that there is a draft executive order circulating for consideration by White House officials that would officially designate “classical” architecture as the preferred style for the... Read more

Board insulation has good thermal performance ranging from about R-4 to R-8 and is used as an integral part of a building envelope’s continuous insulation system.

Because board insulation is used on the building exterior, it is not always subject to the same material health and emissions requirements as batt insulation used inside the... Read more

Hi all, 

Thank you to those of you who attended the Greenbuild Show & Tell! We had an incredible time and learned so much from the presenters -- thanks so much to each of you for sharing.

I am including the slides for some of the presentations below. Please be aware that we have permission from all of the following presenters... Read more

Embodied carbon in products and existing buildings. What does LCA tell us about renovation vs. new construction and material choices?

Guiding Questions: 

What easy ways are there to communicate about embodied carbon? Are there easy ways to calculate it?  What do I need to know about LCA? Are there any found patterns of when it... Read more

Gurus -

I'm looking for (or to build) a set of US district energy projects for developer-led mixed-use/residential neighborhoods/districts.  Does anyone have a resource for this or have started something similar?   

I am not a member of IDEA but utilize their site quite often. Any other resources come to mind?  I'd be happy to... Read more

Hi All,

As you know from the SCL Summit last year, I have been organizing a task group to create a draft of our SCL Contractor Commitment. We have come up with a short Tiered commitment draft as well as some best practices and challenges that led us to the commitment. I encourage everyone to take a look at the draft and please send any... Read more

Has anyone here found an alternative to XPS for the void former?

A structural engineering contact was included in recent conversations about embodied carbon in insulation materials and brought to our attention that this is a common use for XPS that has nothing to do with its insulating properties. It is typically used where concrete is... Read more

Hive mind,

We recently learned that 3M has discontinued the production of their 3M Daylight Redirecting Film (https://www.3m.com/3M/en_US/building-window-solutions-us/solutions/dayli...). This product was selected by an architecture client last year as the optimal daylight/glare control strategy for a school project, and we're assisting... Read more