Championing the
Changemakers

Hey SDL,

I'm curious if anybody out there has developed specification language requiring a certain level of airtightness (as assessed via one or a series of blower door tests) for a commercial project when it is not going for a Passive House certification and a blower door test is not required by code--basically, something in the... Read more

Welcome to the quiz portion of What Makes the Building Envelope Green? BuildingGreen’s Guide to Thermal & Moisture Protection Products.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe attributes of the greenest building envelope products.
2. Explain how to... Read more

Jenny/Dan:

What types of content do anticipate having in the Documentation Toolkit tab? Here's an example of what we have on LEEDuser:

https://leeduser.buildinggreen.com/credit/EBOM-2009/SSc5#tab-docs (login required)

The layout is a little complicated on LEEDuser, since we had to work with a lot of legacy content, but... Read more

Valentina works on the UX/UI design and front-end of the BuildingGreen and LEEDuser websites. With over 10 years’ experience focused on websites usability, she develops prototypes and cross-browser web interfaces as part of the WebDev team. She also collaborates closely with marketing and editorial to create any other visual design project for... Read more

Welcome to the quiz portion of Building Electrification: A Vital Solution to Climate Change.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Understand the relationship between building electrification and decarbonization to improve the efficiency and sustainability of buildings.

2... Read more

Hello all!

I'm new to the group, and so excited to be here. Two part question here (as we think about processes and new year goals).

I am at a smallish firm (20 people) in Boston helping to reform our processes to enable even those that are not steeped in sustainability at a daily level to be comfortable looking for opporutunities... Read more

Gather with the Changemakers in Sustainable Construction

You are invited to join BuildingGreen and your peers for the Summit that has always delivered on driving our movement forward. Over three days of collaboration, workshops, learning, sharing, networking, and socializing, we’ll set the agenda for changes to LEED v5, strategize on... Read more

This is a bit off the thread of sustainable design leadership, but how much design and/or leadership can you get done without an adequate amount of caffeination?

We are looking for recommendations and advice on improving the sustainability of our breakrooms, particularly on the subject of beverage (mostly coffee, but also a fair amount... Read more

Hello - 

I am looking for the recording and the PDF/ slides that were shared 3/6 for the project process share-out/ 5 min presentations. It was super inspiring and I would like to refresh my memory of some of what was shared. Thank you!

–
Alison Nash 
AIA, LEED AP ID+C, CPHC, WELL AP
Associate | Sustainability... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Should housing be affordable? Or should it be sustainably designed, built, and operated?

When you put it like that, the question sounds absurd.

But the idea—usually unspoken—that sustainability wastes precious time and resources is painfully common in the... Read more

Hello, All!  I'm hoping for your help to keep a green roof on a project of ours.  We have a large healthcare project in the Midwest that is coming in over budget.  To avoid losing our extensive green roof, I'm looking for alternate sources of funding - grants, private sources, etc.  Has anyone gone down this path before and have shareable... Read more

Alerting building occupants about indoor air pollutants is important in many situations.

BuildingGreen-Approved IAQ Equipment

Products approved by BuildingGreen range from single-use test kits to monitoring systems installed throughout a building. Some test for gases such as radon, VOCs, or carbon monoxide, and some for mold and... Read more

We are having trouble sourcing a LEED compliant wallcovering adhesive. We specified Roman Pro-880 which is low VOC but doesn't have sufficient back up for TVOCs. Have you had success with other products?

Hi everyone,

I’d like to invite you to join this Friday’s webinar hosted by the Embodied Carbon Network: Using Whole Building LCA to Reduce Embodied Carbon within LEED and Beyond, and to follow up with a tool that I presented at this summer’s Architecture SDL summit, which ZGF has now upgraded and made free to the industry at large.... Read more

Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Welcome to the quiz portion of The Hidden Science of High-Performance Building Assemblies.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define hygrothermal pressure and explain what it requires of water, air, and thermal barriers in high-performance assemblies.
2. Explain... Read more