BuildingGreen Report

Forum topic

Does anyone have an opinion of Autocase?    https://autocase.com/

I had not heard of this platform before.  Their website says that some firms in the group are customers / users.   Website does not do a great job of describing exactly what they do.  Is there value?

Thanks,

Allen

Forum topic

Register now for the next two quarterly SCL calls, brought to you by members of the Steering Committee! These calls are just for SCL members, topical for construction leaders, and hold space for us to learn directly from each other. See you there!

Everything You Wanted to Know About EVs, but Were Afraid to Ask

Monday, March 7th at... Read more

Forum topic

Hi all,

We recently learned that Mass Dept of Environmental Protection (MassDEP) along with a few other state agencies are looking to offer grants for wastewater heat recovery implemented into projects. This is a newer technology that puts a heat exchanger or heat pump in the wastewater system that then extracts the heat energy and... Read more

Team Group

Campus-wide Group

Forum topic

Mark your calendars Sustainable MEP Leaders!!
Here are the details to save the date for the 2020 MEP Summit:

Date: June 9th and 10th, 2020
Location: Stantec Office in Denver, CO
Schedule Outline: Tues. 9th beginning with Lunch at Noon, ending Wed. about 3pm

Gather and learn from your peers! Share your challenges... Read more

Product Guide

Discarded tires are an environmental disaster, and finding a beneficial use for them is a high priority.

BuildingGreen-Approved Resilient Flooring

BuildingGreen does not approve any flooring product that is made with tire-derived rubber, though some products may be appropriate for exterior use.

Environmental and Health Impacts of... Read more

Forum topic

Has anyone done a LEED Homes and a NGBS certification and have insight into the differences, challenges, etc between the two?

Forum topic

We have an environmentally-minded client who asked us to look into an alternative to the blue adhesive film that is typically used to seal uninstalled ducts for IAQ purposes. From a human health and waste perspective, they were hoping to find something that was both plastic-free and reusable. Has anyone tried out other options? I thought it was... Read more

Forum topic

...for all the folks on the west coast.

It’s smokey out there. For anyone looking for a cheap and relatively effective way to clean your indoor air, here is an article on a DIY box fan filters. 

https://www.texairfilters.com/a-variation-on-the-box-fan-with-merv-13-filter-air-cleaner/

This PSA is from our friends at NEEA (... Read more

Product Guide

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

E-Product Display

Quiz

Welcome to the quiz portion of Climate Analysis for Architects (recorded webcast).

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Access climate data.
2. Choose appropriate design energy simulation tools.
3. Know when and how to run analyses with projected weather data... Read more

Peer Network Event

Forum topic

Hi all,

The Sustainable MEP Leaders are assembling an industry push to expand the availability of embodied carbon data for MEP equipment. Our first steps are to send a letter to industry announcing a call to action and future educational webinars on the topic, the current draft letter is attached. In a similar manner as the... Read more

Forum topic

Hello SDL Peers,

We are currently in the process of expanding our firmwide carbon reporting (and goal setting). I am looking to see if anyone has some "best practices" or examples of their own firm's journey to carbon neutrality. Any info or tips are welcome!

Thx, JP

Forum topic

Good morning all,

I'm new to the forum and I am really happy to be here. For the last year or so, I have been working to advance high performance design at Flad, grappling with so many of the issues discussed in this forum. Especially in the context of recent times, it feels really wonderful to join a group of people dedicated to helping... Read more

Forum topic

Hi everyone! I'm extremely pleased to be back in this group after a couple of years out and I'll spare no time in spamming your inboxes. 

MASS is working with UT Austin to help them evaluate their campus buildings for reuse firstly and then deconstruction and material reuse. Their campus, as with most campuses, is constantly being built... Read more

Forum topic

Some of you are aware of my ongoing saga of off-site renewable energy and a LEED certification we are pursuing. The short version is that there is a new-construction corporate headquarters office building (Building #2 on the attached graphic). This building is pursuing LEED certification. 

The company also just installed a 1 MW... Read more