Championing the
Changemakers

Hi everyone, 

We’re excited to announce that registration for the Spring 2024 Sustainable Construction Leaders Summit is now open! Join us at Perkins&Will’s Atlanta office on May 6th, the day before the Living Future Conference. Register early to save your seat, and feel free to reach out to me with any questions at amanda@... Read more

Hi - we're working with the University of California Office of the President to put together low-carbon case studies. The two types we are looking for now include 1) a low-carbon TI (not a full building gut/renovation), and 2) any that involve the circular economy (in this case not just building reuse but product reuse) which could include... Read more

I'm teaching a LEED GA study group and was rambling on the differences between CIR and precident-setting LEED Interpretation (that gets posted in the addenda library and all). Then I went onto LEED Online and was showing how those are submitted... but can't actually figure out how a LEED Interpretation would be submitted. Has anyone done this... Read more

It's official!

https://www.aia.org/showcases/181011-nadav-malin-hon-aia?utm_term=30014108--1cf43a8a-c646-4d26-8f90-3661099d9005

see you in June!

Mary Ann

You're invited to join your colleagues in an SCL Whole Group Web Meeting on Construction Waste May 14th, 2019 11am - Noon EST!!

Report-out web meeting led by Jennifer Taranto and Jenelle Shapiro on what’s been going on in regions, talk as a whole SCL group about how best to support local MRFs' and haulers' activities, and how to leverage... Read more

Welcome to the quiz portion of Seal, Tape, Gasket: A Sticky Search for Better Materials.

Learning Objectives
Upon completing this course, participants will be able to:


1. Choose the best means of achieving barrier continuity for any given application.
2. Assess a joint sealant's service life and product... Read more

The BuildingGreen Guide to Thermal Insulation provides detailed guidance on insulation products and practices, including recommendations on what insulation to use and what to avoid. It's a treasure trove of information for architects and designers, builders, and anyone who is actively considering the impact of insulation on the quality of your... Read more

We are putting together a free guide for firms who have not yet started to figure out what their internal standards are for healthy, low carbon materials/products. 

As part of this effort, we are looking to gather from all of you who already have standards - examples and precedent.

Also we are collecting standards from clients/... Read more

Hello,

We are in the very early planning phase of a k-8 public school project to be designed and built in an economically challenged urban location with very limited site options. The project is not LEEDv4 registered yet.  We are at feasibility and costing the soil remediation, needless to say that we would really hope there would be... Read more

Alerting building occupants about indoor air pollutants is important in many situations.

BuildingGreen-Approved IAQ Equipment

Products approved by BuildingGreen range from single-use test kits to monitoring systems installed throughout a building. Some test for gases such as radon, VOCs, or carbon monoxide, and some for mold and... Read more

Just in time for Saturday Night!!

Get out the popcorn and put away Netflix!
For those who were unfortunate enough to miss this LIVE - you still get to watch the awesome talents of our community! 

You sadly miss out on the camaraderie, connection and wonderfullness of hanging out with everyone (not recorded!) but you do get... Read more

This question came to me via our mutual friend Josh Jacobs, but while interesting it's a bit out of my range of expertise... 

In short, a critical materials assessment specifically focused on airbourne byproducts from a manufacturing process that would be first-of-its-kind in the U.S. 

Team,

See this paper regarding outside air vs. filtration.

https://www.sciencedirect.com/science/article/pii/S0360132313002515

MERV-13 is a good way to get most benefits without a huge cost.

Best,
Luke Leung

Hi all,

AGC is the biggest umbrella organization for general contractors in the states. To date, there has been practically no interaction between the SCL and AGC. In my mind, the SCL group is the most knowledgeable group of dedicated sustainability professionals out there; so is there a way that we can partner with AGC to collaborate ... Read more

We are evaluating Dynamic Glass - and I have always been a bit timid to use. 

Any thoughts / experience on what we should be aware of?

Thanks!

Hey there Hive Mind,

I'm tossing a question out here as I know various compositions of us have had pieces of this conversation about how operational and embodied decarbonization has been incentivizes at state and local levels through various regulatory frameworks. I meant to do research on this topic for a project team of mine and time... Read more

Hi Everyone!

I'm Lauren Shumaker and I'm a Project Manager/Sustainability Manager with Turner Construction.  As a long standing advocate for healthy and sustainable building materials, I look forward to expanding my ability to promote material transparency and shine a greater light on our ability to positively impact human and... Read more