Championing the
Changemakers

Has anyone used Insight for Revit to document the LEED Daylight Credit If so, would you recommend it?

Thanks,

_Ilana

Hi all,

I had a position listed for a Sustainable Design Coordinator which we have down for the moment as we've taken on a fall intern instead. In the interim, however, I did have a couple of great candidates that I'd like to help find good matches. One of those candidates is Marissa Lantieri, see her resume and portolio attached.

... Read more

Attached are the raw notes from the Design Process Conversations.

And here are the Guiding Questions from the Agenda Survey:

Design Process: how to intervene to get better outcomes?

How do I crack the nut of making a difference within my firm in the Design Process?

What strategies alter our fast-paced design... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Standard spray polyurethane foam (SPF) insulation is made using blowing agents with extremely high global warming potential (GWP), which can cancel out much of the potential energy savings from use over its life... Read more

At the start of 2021 there was one signatory to the contractors commitment (thanks Leopardo!).  Today, there are 12 companies participating, representing over $24 Billion in total revenue.

We don’t always give ourselves enough credit or take enough time to savor our accomplishments because there is always more to do.  But, this is a big... Read more

Hi all, 

I'm looking for critical mass here. Do any of you have or know of clients who are requiring Just labeling for their consultants? I've heard that Google is asking this, and wondering who else might be on that course. Thanks! 

Hi all,

Later today, we will be delivering the BITuser development site ready for content input. Andrea has created instructions to help get you started.

We would like to set up a few editor profiles for you. Could you let us know who should have a profile for content management? We need first and last name and an email.

... Read more

Wellness is key to sustainable design. As more and more clients understand the value of healthy built environments, designers need to understand the various wellness rating systems available, and which would meet the project's goals and needs.

WELL and Fitwel have emerged as the two leading wellness rating systems,... Read more

Hello Gurus,

I’m writing to share with you an effort a small group of lighting designers from the Boston area started which is now rolling into a large scale effort.  We’ve put together a Lighting Advocacy Letter to accelerate the sustainability of lighting products. Inspired by the AIA Materials Pledge, the letter is intended to... Read more

Hi everyone, 

Following November's SCL Summit, I put together a model Construction Waste Management Action Plan based on the ideas shared in our focus group. It is linked below in Google docs, so everyone should have access to live edit the plan. Please take a look and add comments if you can. It's a very rough outline, so we can... Read more

Welcome to the quiz portion of A Guide to Selecting Sustainable Textiles.

Learning Objectives

Upon completing this course, participants will be able to:


Recall at least three important considerations for choosing sustainable textiles. Explain the most significant life-cycle impacts of textile manufacturing. Use credible... Read more

Hey Everyone!

We are delighted to share a major milestone in our commitment to sustainable design. After two+ years of intensive research, refining, and internal application, NBBJ is thrilled to announce the external launch of ZeroGuide, an innovative tool for early-phase carbon estimation, now available to the entire AEC community!... Read more

Hi,

We have a market-rate housing highrise project that is going through VE right now: we need cheaper/lighter rainscreen claddings than precast concrete or GFRC.

If you've gone through this similar exercise, I would greatly appreciate recommendations for cladding manufacturers/products with EPDs available. We are open to metal... Read more

ASHRAE 209 in all its glory has been uploaded. This will impact our architectural process, for better or worse, so we should embrace it and learn from it. The revised AIA Energy Modeling Design Guide (due out next year) has been timed to correspond roughly to 209 coming out and will include references to it. The first few energy modeling '... Read more

Team SCL,

This was a tough week. My husband coined a phrase "20% laid off."

Unfortunately, 50% of our business is currently impacted by governmental orders stating that our work is non-essential. This is bitter-sweet. I certainly want people to be safe, but we've had to make some tough decisions and in the geographies that were... Read more

I was recently asked if there is a way to quantify financially what one MT eCO2 might be worth in the context of a building owner reducing their own carbon emissions.  How do you put a dollar value on those reductions?  Does anyone have experience with that or can you point me to the correct resource to answer this question?

We had a small group tour the Dell Seton Medical Center campus today, and a much larger group tour the new Austin Public Library. 

My favorite quote from the Medical Center tour, was about this project being the first private development on U of Texas property. "It took 58 separate legal agreements. We won a ULI award for making the... Read more

Anyone know what stages does CARE include? Does it include B1-5, C1-4 or D?

Thank you!