Championing the
Changemakers

Board insulation has good thermal performance ranging from about R-4 to R-8 and is used as an integral part of a building envelope’s continuous insulation system.

Because board insulation is used on the building exterior, it is not always subject to the same material health and emissions requirements as batt insulation used inside the... Read more

The EC3 Tool has come up quite a few times in the Green Guru's conversations.  We're hosting an online review with Stacy Smedley and Mark Chen from Skanska.

Wednesday September 29th at 3pm PST

The tickets are free and this will be a Teams meeting.

https://www.eventbrite.com/e/using-the-ec3-tool-the-why-and-how-tickets-...... Read more

I was wondering if any design or contractor friend here can kindly share the carbon emission factor of excavation during construction. 

I found a paper that provides energy use rate per cubic meter and associated carbon emission in kgCO2 for different phase of construction such as excavation earth work, pouring and lifting concrete,... Read more

Has anyone here found an alternative to XPS for the void former?

A structural engineering contact was included in recent conversations about embodied carbon in insulation materials and brought to our attention that this is a common use for XPS that has nothing to do with its insulating properties. It is typically used where concrete is... Read more

Hello Sustainable Advising Leaders!

We have another call coming up next Tuesday, March 17th at 1pm Eastern Time. Here is an agenda, Zoom call information is below.

We'll dive into getting to know each other better and also talk about the best path forward for this group.

Hope you can join us!

Jen

Join Zoom... Read more

We're hiring: Join our dynamic team as a Sustainablity Coordinator at Structure Tone Southwest!
APPLY NOW!

Posting is listed for Dallas, but we're open to Austin, Houston, and San Antonio.

Are you passionate about sustainable building practices and wellness in the built environment? Join our team at Structure Tone Southwest... Read more

Jennifer is part of the Peer Networks team at BuildingGreen. Her Connections Catalyst role for the Sustainability Leaders networks includes events planning and bringing in new members.

Jennifer’s experience before BuildingGreen includes two years working with AmeriCorps Cape Cod on outdoor environmental projects; a year teaching... Read more

Welcome to the quiz portion of Energy Modeling: Early and Often.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how energy codes and standards are pushing commercial projects beyond what they can do without modeling.
2. Describe the energy and cost-savings benefits... Read more

Has anyone had any success with achieving the LEED Building Envelope commissioning points with an alternative compliance path using the requirements of the PHIUS verifier? It seems like an unnecessary duplication to ask the client to pay for a BECx agent and a Passive House verifier. Or am I missing something? I can't find any LEED... Read more

Hi!

I'd love to hear what you all--especially the New Yorkers--think about the newly adopted gas ban. Is this the bill we were hoping to see? Any concerns or questions?

One question I have--maybe just reveals my ignorance--but it seems to leave the door open to steam hookups, which I guess are still an option through much of... Read more

Hi, we need 3-4 folks to volunteer to join us to work out a draft Materials section for the Contractors Commitment.  Meeting set for 6/16 @ 2 PM CST.

Please message me at pslloyd@leopardo.com if interested in participating.  I will forward out the meeting invite. If the time doesn't work, but you want to participate, I will share info in... Read more

I'm sure many of you remember when Greenbuild 2020 was scheduled for the week of the presidential election and if was shifted back one day. 

If anyone has small kids and have gone to book your Greenbuild 2022 travel, you've potentially noticed (as I have) that I'll have to travel on 10/31 and will miss all Halloween activities with my... Read more

Happy new year everyone!

My name is Vandita Mudgal, I am the first ever 'Sustainability Engineer (district)' for Hensel Phelps N. California district (covers Nor Cal and Pacific NW). As mentioned, this is the first ever sustainability position at Hensel Phelps, therefore I am developing a lot of processes and systems for our district... Read more

Hi, curious if anyone in the group has considered using Fitwel in an existing (built) school project (K-12). 

Would be interested in hearing your experiences and if this tool is a good fit for this type of project.

Welcome to the quiz portion of An Advocate’s Guide to Resilience Regulations!

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how U.S. municipalities are using codes to improve the resilience of the built environment in the face of worsening climate change.

2. Delineate five... Read more

Does anyone share the same feeling of stagnation? We are supposed to hit 80% pEUI reduction now and working towards 90% mark, but I don’t see it happening for majority of our projects, even the “right” ones that we implemented integrative design process & iterative energy modeling. I am wondering whether anyone would be willing to share... Read more