Championing the
Changemakers

Hello all,

I have a quick question for you. While Energy Star appliances are a no-brainer for projects, I don't see a hard requirement to select Energy Star appliances in the energy prereq/credit. There are references in the water section for water using appliances like ice machines, dishwashers, clothes washers, etc., but no related... Read more

Glazing connects occupants to the outdoors, but with so many opportunities for air leakage, poor insulation, and thermal bridging, glazing is the primary weak link in building energy performance.

BuildingGreen approves glazing that offers strong energy performance properties for a variety of... Read more

Welcome to the quiz portion of LEED vs. Green Globes: A Definitive Analysis

Note: If you are taking this quiz as a member of LEEDuser, please take the quiz here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Highlight the most significant differences between LEED and Green... Read more

We have all these resources out here in the ether but it’s so hard to pull them into one spot! I was asked, last minute to join a client call today to help convince both the client (affordable housing developer) and the mechanical engineers to "stick with" a commitment to 100% electric design that was publicly stated when the competition was... Read more

Dear SDL,

After almost 12 years at Sasaki, I have finally decided to leave for a path slightly-less-traveled. My own development project in Boston (passive house, ZNE condos) is in construction and I will be focusing my attention on that over the course of this year, and then hoping to continue doing similar integrated... Read more

We just wrapped up an awesome Winter Summit at Gulf State Park in Alabama. I'll be posting flip chart pages and notes here--we can use this forum to continue the conversations. 

Apologies for the flurry of emails, but it seems best to start separate threads for each topic. If you'd rather limit the flow, you can switch to daily digest... Read more

Here’s a nice NYTimes op ed on urban density that directly addresses the concern Gwen raised on out call today: 

https://www.nytimes.com/2020/03/24/upshot/coronavirus-urban-density-risks.html?referringSource=articleShare

Hello,

We have a mass timber purpose-built rental project specifying flooring at the moment and are trying to find a healthy flooring option while managing acoustics with CLT floorslabs. We don't typically spec vinyl flooring due to the health concerns around PVC, but the project is budget-conscious, and our flooring supplier is... Read more

Colleagues

It has been my great pleasure to serve the AIA's COTE Top Ten review process, both as a main juror and, most recently, as one of the technical review team.  I have specifically reviewed the Discovery and Energy measures for the past few years.  I will be serving again on the 2021 team.  The AIA has already received many more... Read more

Faucets with high flow rates waste water—not to mention the energy used to treat and deliver it to our buildings—and the additional water stresses our wastewater treatment systems.

Can anyone recommend waste haulers and processing facilities that are LEED compliant for processing commingled waste in the DC / MD area?

I know this is the Sustainable Construction Leaders and not the LEED Construction Leaders, but with waste management being such a big part of what we do, I wanted to crowd source a request for help.... Read more

Hi, I've been following the copper piping discussion and am wondering if copper piping has been a problem in greywater systems.    We've used Aquatherm to some extent in greywater treatment.

Hi MEP Leaders,

Just a reminder that our monthly meeting is next Tuesday, May 9th, at 2:00pm ET. All SMEPL network members are invited to join!

You can view the agenda here, and the Zoom info is below.

Join Zoom Meeting
https://us02web.zoom.us/j/83598691786?pwd=MjI2S01yZUJRSG4zcXRBNWtPbE5RZz09

Meeting ID: 835... Read more

Hello all, 

Wondering if anyone has experience with lead limits in electrical cable and wiring? 

LEED for Healthcare allows a limit of 300 ppm of lead in electrical wire and cabling - my search for compliant products has been all dead ends. (MRc PBT Source Reduction - lead, cadmium, and copper)

Acceptable regulations for... Read more

Gather with the Changemakers in Sustainable Design

You are invited to join BuildingGreen and your peers for the Summit that has always delivered on driving our movement forward. Over three days of collaboration, workshops, learning, sharing, networking, and socializing, we’ll explore what Sustainability Leadership looks like in 2023 and... Read more

Hi All, we have about 40 people in our network of Sustainable Construction Leaders.  These positions are not as numerous as they should be, and companies often have a difficult time applying a monetary value to what we bring to the table. 

Participating in the salary survey can provide insights that help us all interpret our relative... Read more