Championing the
Changemakers

Ali Flynn and Alejandra Arce Gomez are planning a breakout meeting for the Waste Managment Group for all interested. 

Please fill out the doodle poll below so that we can find a good time:

https://doodle.com/poll/qxd4zxrw9xzrxwc6

Ali and Alejandra have drafted an updated version of the Commitment for Waste (attached) after... Read more

If you are interested in sharing this WELL AP Exam Study Guide within your organization... Read more

As announced in last week's SDL/SCL Winter Summit, I have been working with a group of regional AEC professionals, industry stakeholders, and the New Buildings Institute on two code proposals to the 2021 Seattle Building Code that limit the Global Warming Potential (GWP) of concrete & steel in buildings over 50,000 sf (see attached).  We ... Read more

Hello Green Gurus,

We’re happy to see the first round of summit registrations rolling in! We’ve had lots of questions about specific topics for the sessions. As usual, the agenda will be based on topics that are top of mind for you.

Whether you are already registered or not, please fill out the Pre Summit-Palooza Survey to help us... Read more

I am working on a new community development in St. Paul that is striving to achieve net-zero energy. We are able to get there mathematically by using the extra generation on light industrial rooftops to offset medium-density housing energy use (all buildings are anticipated to have different, private owners). However, this puts us over... Read more

Hi Sages,

As you may have seen in my message, the Peer Networks Member List is not very helpful to us (yet), because a person can only show up in one network. Many of us are also in SDL or other networks; there are many more of us than show up when you filter that list for "Sages."

Until we can get that fixed, we'll share the... Read more

Hi,

We have a market-rate housing highrise project that is going through VE right now: we need cheaper/lighter rainscreen claddings than precast concrete or GFRC.

If you've gone through this similar exercise, I would greatly appreciate recommendations for cladding manufacturers/products with EPDs available. We are open to metal... Read more

Conventional roofs contribute to heat loss, heat islands, and excessive stormwater runoff.

BuildingGreen-Approved Green Roofs

BuildingGreen approves systems with appropriate planting media that can be created from regional materials and may be blended for specific characteristics, such as:

Wondering if we can have a dialog on HVAC load calculation software... we are currently still using Trane Trace 700, but with the future migration to Trace 3D+ coming are looking into other options. Never used HAP but I haven't heard great things, and we dabbled in IES VE for a while, but went back to Trace since at that time there was no... Read more

Hi all,

We have an institutional client who has tired of LEED and is instead putting forth EarthCraft Light Commerical as a replacement certification (they like the performance verification & lower cost that ECLC provides).  Has anyone used ECLC? It seemed an odd choice but wanted to hear from others on their experiences. The... Read more

Embodied carbon in products and existing buildings. What does LCA tell us about renovation vs. new construction and material choices?

Guiding Questions: 

Hi everyone, it was so great to meet some of you at the winter summit and finally connect names with faces!

We have a project that is targeting CalGreen Tier 2 and LEEDv4 Platinum.  Thought I'd reach out to see if anyone on this forum has found comparison guides between the two?  Looking for something similar to this CalGreen 2013 tier... Read more

Hello,

We are having a discussion / a bit of a debate in our office about the merits and sustainability of different roofing materials. Our current standard is to use a PVC membrane, which we all know is highly toxic. TPO is an obvious alternative that is less toxic, but it has some performance concerns and can often lead to leaking (not... Read more

Welcome to the quiz portion of Measuring Energy Use in Buildings: Do Our Metrics Really Add Up?.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the differences between site energy, source energy, and energy cost.
2. Summarize three ways in which source energy can... Read more

Welcome to the quiz portion of Passive House on Campus: Eight Exemplary Projects​!

Learning Objectives
Upon completing this course, participants will be able to:


Explain the primary reasons that higher-education projects are pursuing Passive House certification, including its impact on the environment and occupant health... Read more

Does adding solar panels reduce a building's EUI?

Existing operational use of a building is 80 kBtu/sf/year. When we add solar, it will change the source of energy but does not change the usage.

My understanding is that the EUI does not change, but it would be good to hear from others.

It's energy consumption at the point... Read more

Hi All,

I wanted to share an exciting opportinity with this esteemed group: Placetailor is seeking out a Mechanical Engineer to add to their growing team. They are located in Boston, MA and focus on Passive House, Low-energy Design, and they have for two years running meet the tenets of the AIA 2030 Commitment! This is an exciting place... Read more

Remember 2013? LEED version 4 had just been released to the public. Hardly anyone was using it, though—not only because they didn’t have to, but also because there just wasn’t a pathway to achieve many of the new credits in the rating systems. Especially the product-related credits in the Materials & Resources category, along with the Low-... Read more

P. U. L. Antelo, M.A.