Championing the
Changemakers

Our building scientist has been using Insight 360 to model daylight and document it for LEED certifications.  However, it appears that Autodesk is no longer fully supporting the tool and may eventually stop all together.  (we have not been able to run simulations for weeks due to a change to how "cloud credits" work on their end that they... Read more

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Many of you have heard me speak of our foundations effort to host a conference in Houston this November that is focusing on the social and economic side of community resilience preparedness. While we purposely are emphasizing these topic areas, we do see the importance of these conversations being witnessed by the design and planning community... Read more

Hi everyone,

Just a reminder to please fill out the SDL 2024 Events Attendance Poll by the end of next Monday, December 18th. Thank you so much to those who have filled it out already! :) 

-Amanda

Commonly used for interior partitioning of commercial buildings, light-gauge steel framing is increasingly being used in residential construction. Compared to solid wood, steel studs are lightweight, dimensionally stable, resistant to insect damage, and of consistent quality. 

BuildingGreen-Approved Structural Steel

Products... Read more

Hi folks,

Here's the next Peer Networks private webinar. As usual, it will be recorded and shared in the network if you can't make it in person:

Thursday, July 18, 2pm EDT (11am PDT)

The Center for Active Design (CfAD), operator of the Fitwel Certification System, recently launched Fitwel v2.1, which advances a vision where... Read more

A question for you, all input appreciated: What are some metrics and data points you all use to report out to your staff and leadership? I'm starting on higher-level analysis of our projects' performance by typology and through other lenses, and I wonder if you have found metrics or reporting points that are particularly impactful in your... Read more

For those of you that attended Greenbuild this year you may have heard about the Legacy project taken on by the USGBCMA Chapter. The winning project was The Green Building Tech Club at Madison Park Technical Vocational High School. The USGBCMA Chapter recently reached out to me and asked if Structure Tone would take on an intern this summer,... Read more

Hello Green Gurus,

Some of you may have heard that the Sustainable Construction Leaders Group has been developing the Contractor’s Commitment, a set of sustainability guidelines for contractors to implement in their companies. 

The Contractor’s Commitment will be going live on November 13th with this half-hour webinar introducing... Read more

Hello Green Gurus.

I've been looking into EPDs lately and ran across a few companies with Product Envionmental Profiles (PEPs) which they say are also known as EPDs. Does anyone have any experience with PEPs or know if they actually are EPDs? They reference ISO standards 14040 and 14044 in the writing and ISO 14025 in the list of... Read more

Thank you for joining us for this webcast! Please complete the following survey to provide us with feedback and to record the information we need to report your CEUs.

By providing the information in this survey you will enable us to automatically report these CEUs to the appropriate organizations. Everyone attending and seeking CEUs must... Read more

Dear all,

On a major renovation where the wall R-value/U-value needs to be brought up to energy code, specifically a mass wall situation, does anyone have insights on how the situation is best dealt with? On the project in question for me, the continuous insulation might have to be added to the inside surface of the mass wall and there... Read more

There has been a lot of discussion re antimicrobials in this group, so here is a pre-release of this month's article on the topic. It's not an extensive feature, but I hope you find it informative.

Brent

Lake|Flato is growing our design performance team!  If you know any great applicants for our new design technologist position, please send them our way:

Design Technologist in San Antonio.pdf (lakeflato.com)