Championing the
Changemakers

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Hi Everyone!

I'm Emily, GCI General Contractor's Sustainability Manager in San Francisco. Nice to meet you all.

I started with the company in 2013 and since then we've doubled in employees. I have been handling sustainability solo, until about 8 months ago, when we hired Alejandra Arce Gomez full-time to help manage the... Read more

Welcome to the quiz portion of LEED vs. Green Globes: A Definitive Analysis

Note: If you are taking this quiz as a member of LEEDuser, please take the quiz here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Highlight the most significant differences between LEED and Green... Read more

Pipe that delivers domestic water in North America is typically made from copper, chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX), all of which present environmental challenges. Bimodal polyethylene  (PE-RT) and polypropylene (PP) are potential alternatives with lower climate and health impacts.
... Read more

Hi all, 

I'm excited to announce that LHB (my 250-person multidisciplinary firm located in Minnesota and Wisconsin) is hiring a full-time Regenerative Design Leader. I thought this might be helpful for those of you looking for example job descriptions for your own postings, or if you are looking to make a move (we do have an office in... Read more

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

Hi all,

Just a reminder that the last day to RSVP for the Living Future 2023 Peer Networks Meetup is tomrorow, April 26th! There are still some spaces left, with 34 people currently signed up. Please RSVP here if you'll be attending.

When: Wednesday May 3, 2023, 7:30-9pm ET

Where: SmithGroup, 1700 New York Avenue, NW, Suite... Read more

Hello Everyone,

Here is the 2019 SCL Demographics Report, thank you to everyone who submitted responses. Enjoy!

The SCL Salary Survey Report will be coming next and please note that the Salary Survey is only distributed to those who participated.

All the best,

RoseAnn

Hi everyone,

I’d like to invite you to join this Friday’s webinar hosted by the Embodied Carbon Network: Using Whole Building LCA to Reduce Embodied Carbon within LEED and Beyond, and to follow up with a tool that I presented at this summer’s Architecture SDL summit, which ZGF has now upgraded and made free to the industry at large.... Read more

The COTE Toolkit just launched on AIA.org's site, please go and check it out and share with your networks. The project spanned over the last year+ with over 40 authors, subject matter experts, and reviewers contributing to the process, (including many Green Gurus!)

With the goal of closing the information gap to designing high... Read more

I'm sure most (if not everyone) is aware that LEEDv5 is under public review until May 20, 2024. I know I need to make time to flip through it, review, and comment, but I'm having a heckuva time protecting the time in my calendar to do that. Anyone interested in joining me for a 60 - 90 minute meeting to do this together as an accountability... Read more

Hi all,

We are designing a mass timber building and are closing in on selecting our mass timber supplier.  One supplier is offering FSC wood and the other is offering PEFC.  I don't know enough about PEFC to make a clear recommendation to the client about how it compares to FSC.  I understand that PEFC endorsed SFI, so that concerns me... Read more

THIS WEBINAR REGISTRATION IS CLOSED.

Wondering how LEED v5 development is progressing? Here’s your chance to find out from two of the folks who’ve been closest to the process. Join us for this 45-minute event on July 26 at 11:30 Eastern (8:30 Pacific) .

LEEDuser hosted... Read more

Hello all,

Does anyone know of any Rebate Program for either induction cooking equipment or kitchen electrification (new or existing)? Looking for any local or state or even federal programs (outside of California) that incentivize designing/building/retrofitting towards an all electric kitchen for any program type (institutional, single... Read more

Help regarding below...

OSHA, see below link, suggests 6' social distancing for unvaccinated or at-risk workers.

https://www.osha.gov/coronavirus/safework#role-employers-workers

Is your office going to maintain 6' social distancing for your workers?   Is the reason above because there are unvaccinated or at-risk workers?... Read more

Welcome to the quiz portion of Video: Insights to Success on LEED-CI Certification.

Learning Objectives
Upon completing this course, participants will be able to:


1. Identify key changes to LEED CI 2009 (ID+C).
2. Identify the circumstances of a LEED-CI project that challenge the abilityto certify.
3.... Read more