Championing the
Changemakers
BuildingGreen champions the changemakers in sustainable design and building, with trusted insight, unparalleled education, and communities that are transforming the industry.
Log in to your profile
Image: Piranka
Forum topic
Hi all,
We have a newly constructed, core/shell project having some hot water issues in the core restrooms.
There is a 0.35 Toto lav installed throughout. The hot water heaters are adjacent on each floor, located in the janitor closets. We did the math, and there could be a gallon of water standing and cooling in the pipe between... Read more
Forum topic
Hello -
I am looking for the recording and the PDF/ slides that were shared 3/6 for the project process share-out/ 5 min presentations. It was super inspiring and I would like to refresh my memory of some of what was shared. Thank you!
–
Alison Nash
AIA, LEED AP ID+C, CPHC, WELL AP
Associate | Sustainability... Read more
Product Guide
Composite windows come in two basic types: fiberglass, and wood/plastic composite.
BuildingGreen-Approved Windows
Fiberglass and other composite window lines have NFRC unit U-factors of 0.20 or lower. Higher U-factors are allowed for products that include significant recycled content.
Manufacturers also must demonstrate... Read more
Forum topic
Hello Green Gurus,
Now is a pivotal moment. Net Zero Stretch Code legislation has been proposed in the Massachusetts House and Senate, and draft code language is currently being developed by the Board of Building Regulations and Standards (BBRS). The Net Zero Stretch Code is currently the greatest single opportunity to support reduced... Read more
Forum topic
Hi Carbon Working Group,
It’s been a while since our last online meeting on 3/31 –- admittedly, a bit too long -- so I wanted to share some updates. You might have seen Candice Pearson’s 5/13 post about the structure of the Contractor’s Commitment and how it’s evolving into a set of guidelines available not only to our SCL Group but to... Read more
Forum topic
Greetings Gurus!! I'm super excited to invite you all to help each other :)
As many of you know, BuildingEase (a completely free tool!) has been born this year, the newest function we just launched is the Crowdsourcing function.
Crowdsourcing lets anyone contribute products to a public Material List (similar to an Outline Spec)... Read more
Forum topic
Greetings to all of the AEC SD Leaders (a.k.a. the Green Gurus)!
Over the last two months, the 32-member Build-Back-Better (BBB) letter working group has developed a robust list of first 100-days, built-environment-focused executive actions for the Biden administration to consider. Kara Kempski, the AIA’s Director of Federal Relations,... Read more
Quiz
Welcome to the quiz portion of Certified Wood Update: Comparing SFI to FSC on Key Forestry and Health Issues.
Learning Objectives
Upon completing this course, participants will be able to:
1. Explain the purpose of forest management standards and what they measure.
2. Differentiate between FSC and SFI... Read more
Forum topic
On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more
Reports, Courses, Study Guides, Live Webinars
THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.
This one-hour crash course will review the concepts and key facts within the WELL Building... Read more
Forum topic
All,
I've probably spoken to a few of you over the phone, but I wanted to make sure all of you know that we are hosting a 4 part webinar series on our Tally LCA software, kicking off tomorrow 10/10. We just released the new of Tally version and ended up doing far more development work than initially anticipated, in no small part due to... Read more
Forum topic
Hi Everyone - I hope this isn't a repeat topic. We are starting to get familiar with TallyCAT at SAR+ and have a few people testing our projects in it. Is anyone willing to help us troubleshoot or share lessons learned? We're running into a few errors and wonder if our Revit models and workflow are the issue, or if we need to be doing something... Read more
Forum topic
Here's the Core Purpose for this group that came out of the Inaugural Summit.
We're off and running!
Forum topic
Here are the links I mentioned at today's meeting:
Timeline:
https://docs.google.com/presentation/d/1RlN4t23uvBtxEzp4QuyqL-w5bqmE4P90...
BG Contacts and Responsibilities:
https://docs.google.com/document/d/1MWYuAEitjk7Zpc8KUNf1LwG3-5wK6sIlgwro...
BITuser Contacts and Responsibilities:
https://docs.google.... Read more
Forum topic
We broke up into 5 discussion groups by market sector:
Commercial office Education Healthcare & Labs Multifamily Civic/institutional/sportsHere are the proposed "guiding questions":
How do other firms define 'design thinking'? Do they have a standard process used across projects and, if so, how they have made that take hold... Read more