Championing the
Changemakers

Evaporative coolers use far less electricity than conventional refrigerant-cycle air conditioners and they operate without the use of refrigerants, both features that make them attractive for green buildings. However, their suitability is limited to drier climates, and most products use significant quantities of water.

BuildingGreen... Read more

If anyone else has gotten confused going between parts-per-million and percentages (parts per hundred!) for material reporting here's a little infographic that might help. Feel free to use or improve! 

Hello Sustainable Design Leaders!

Here are the details for an upcoming SDL Peer Network web call, this webinar will be a call to share research and resources around mass timber. Hope to see you there!
REGISTER HERE!

Embodied Carbon and Mass Timber – a shared learning conversation
March 31st, 2020
3pm - 4pm ET (... Read more

The current Stantec/BuildingGreen featured topic is Material Health. Read on to learn the essentials, and then dive deep to earn CEUS.

Also see the Resilient Design featured topic, and also a survey of topics trending in Stantec’s regions.... Read more

***Cross-posting this from SCL Group***

Last year I was approached by Green Advantage, remember them from like 2005? There has been a LEED innovation credit for as long as I can remember.

Has anyone seen employed Green Advantage recently? Is anyone asking for it?

Do you see value in GCs/CMs/trades having this training... Read more

Hello - 

I am looking for the recording and the PDF/ slides that were shared 3/6 for the project process share-out/ 5 min presentations. It was super inspiring and I would like to refresh my memory of some of what was shared. Thank you!

–
Alison Nash 
AIA, LEED AP ID+C, CPHC, WELL AP
Associate | Sustainability... Read more

Hi there colleagues!

Out of curiosity, do you plan on attending Greenbuild in person in San Diego in September? My staff asked me if we were going and my answer is partially contingent on the extent to which attending would mean getting to see some of our favorite people (read: all of you). Looking forward to taking the temperature of... Read more

Happy Thursday, all!

I will be presenting with my colleague, Emily Hoffman, and our counterpart from Seattle, Duane Jonlin, on how firms can contribute more to aggressive energy and carbon targets, from the perspective of three people that see thousands of projects each year.  We see the best and the worst, and we're convinced that our... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

Sustainability leadership has requested that you take this quiz to help assess sustainability literacy across the firm. Your own results will be presented to you at the end of the quiz but will not be shared with anyone else. Only aggregated, anonymized results will be available to others.

Please don’t do research to inform your answers... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

All,

I've probably spoken to a few of you over the phone, but I wanted to make sure all of you know that we are hosting a 4 part webinar series on our Tally LCA software, kicking off tomorrow 10/10. We just released the new of Tally version and ended up doing far more development work than initially anticipated, in no small part due to... Read more

Welcome to the quiz portion of Materials Transparency & LEED.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Describe the documentation needed for products to meet the Building Product Disclosure and Optimization: EPDs credit, Option 1 in the LEED v4 BD+C and ID+C rating systems.... Read more

Hi Everyone - I hope this isn't a repeat topic. We are starting to get familiar with TallyCAT at SAR+ and have a few people testing our projects in it. Is anyone willing to help us troubleshoot or share lessons learned? We're running into a few errors and wonder if our Revit models and workflow are the issue, or if we need to be doing something... Read more

hi all! I'm almost at the finish line with this year's 2030 reporting...whew. I'm running into an issue that I wanted to throw out to this group, regarding the zero tool and national average baselines. Hoping some of y'all who manage your firm's 2030 data, or are just more familiar with CBECS and related data, have some insight / experience to... Read more

Food waste is a major source of greenhouse gas emissions from landfills due to methane released during anaerobic decomposition.

BuildingGreen-Approved Composters

BuildingGreen approves in-vessel commercial composters, which require the smallest footprint and are most likely to be suitable for a densely populated area.

Why... Read more

Hi Everyone - I'm posting this on behalf of Jeff Frost whom many of you know from his days as an SD Leader with SmithGroup and SERA and in his new role as head of Brightworks Sustainability's materials group.  I am excited to be working with Jeff on this concept of multi-attribute product scoring.  Cheers, Lona

Dear SDL’ers,

We’ve... Read more