Championing the
Changemakers

I'd love to hear thoughts from the design, consulting, and contracting firms in this group about ways to make our specs more inclusive, or at least less exclusive to minority and women owned contractors and subcontractors and others that have not had the benefit of what a recent "Equity in Specs" presenter termed the "Fathers / Brothers / In-... Read more

Hello, what acceptable levels of air quality are you using to evaluate natural ventilation strategies for your projects?  In our Living Building we only open windows when PM10, PM2.5, etc. are within LBC and WELL limits.  In a seasonally smoggy urban environment, this limits how often we can utilize natural ventilation even if the outside... Read more

Hi, all.

Has anyone used Unicel's Timber Curtain Wall System? It uses engineered glulam wood mullions on the inside with aluminum mullion caps / butt joints. Has anyone gotten close to using it, but couldn't get it procured for a particular reason? They note up to 72% more energy efficienct than a conventional aluminum curtain wall and... Read more

We think fresh water supplies are endless, but this idealistic vision is clouded by the smoke of countless forest fires in the U.S. West and elsewhere. Instead of endless bounty, climate change is bringing us catastrophic droughts and flooding that now dominate the headlines and threaten entire regions.

This report covers innovative... Read more

Can anyone suggest a recruiter that knows the trick to finding MEP talent that is passionate about sustainability? It would be much appreciated.

Hi everyone,

Since I know we have a lot of talented people in this group, I'd like to reach out to those of you based in Los Angeles and see if anyone is interested in talking at an upcoming Living Building Challenge collaborative event.  The topic of the meeting is "Selecting Healthy Materials 101: From the perspectives of... Read more

Are any of you working on projects that are pursuing the additional point for Indoor Water Use Reduction on a HC project via Table 4 Compliant laboratory and medical equipment? If so, what sterilizers are the projects using?

We are receiving pushback that the Sterilizer metric doesn't make sense. I am interested in any insight or a... Read more

Hi, curious if anyone in the group has considered using Fitwel in an existing (built) school project (K-12). 

Would be interested in hearing your experiences and if this tool is a good fit for this type of project.

So I was testing assigning a BIT Expert to a Best Practice and I am having trouble getting the profile image to appear.  

When I upload a profile picture, it appears on the standard profile page from "My Account" but when I navigate to the BIT Best Practice 01, the image does not show and it takes me to another profile page that does... Read more

Hello and Happy New Year!

I joined the SAL Peer Network a few months back and I’m really excited to be part of this group, although a bit delayed in my introduction. I’m an architect working as a consultant and managing the Sustainability Department at Entegrity (an energy and sustainability consulting firm) located in Arkansas. I’ve... Read more

Greetings, SDL network - We are attempting to resolve an issue with how data center projects calculate baseline EUIs for the AIA 2030 Commitment and could use some help from this network. With projects that comply with code prescriptively (i.e. not energy modeled), we have found the default baseline assumptions within the DDx platform are not... Read more

Hello Green Gurus!

We have some exciting details for the next All Peer Networks webinar on Design Agency & Civic Engagement: Building Sustainable Communities.

REGISTER HERE - Hope to see you there!

Design Agency & Civic Engagement: Building Sustainable Communities
June 25th, 2020
3pm - 4pm ET (Noon - 1pm... Read more

Hi!

I'd love to hear what you all--especially the New Yorkers--think about the newly adopted gas ban. Is this the bill we were hoping to see? Any concerns or questions?

One question I have--maybe just reveals my ignorance--but it seems to leave the door open to steam hookups, which I guess are still an option through much of... Read more

<iframe width="560" height="315" src="https://www.youtube.com/embed/7tCYQiWxxyA?si=lzTgKz9JaQ50_8HT" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>

Sign up now to roll up your sleeves and have fun solving real problems! April 28 from 3-5pm ET

DESIGNING FOR DECONSTRUCTION

Building deconstruction, or disassembly, is a critical strategy for carbon reduction, minimizing waste & contributing to a circular economy, yet remains a serious challenge for many reasons.

Many... Read more

Hi everyone,

Thanks so much to all who filled out the Doodle poll for the Sages monthly call meeting time, and to those who have introduced themselves on the forum.

We’ll be going with Monday, March 11th at 4 pm ET for this next meeting, and I’ll be sending out a calendar invitation shortly. It’s been a tough call to make — we... Read more

Hello fellow SCLers,

Last year I was approached by Green Advantage, remember them from like 2005? There has been a LEED innovation credit for as long as I can remember.

Has anyone employed Green Advantage recently? Is anyone asking for it? Do clients pay for the training, is it an investment by your company, and/or a cost passed... Read more

For folks in the Southern New England, New York City area, I wanted to let you know about this interestesting design summit that is focusing on eliminating forced and slave labor in the building materials supply chain. I am not involved in organizing the summit, but I plan to attend. It is at Grace Farms in New Canaan, CT from 9:00 to 5:30 on... Read more