Championing the
Changemakers

Hello Sustainable MEP Leaders!

BuildingGreen is already hard at work planning next year's MEP Summit. We are looking at venues in Denver, CO and dates in late May or early June.

In order to book a venue, we need to nail down dates soon. Please fill out this Doodle poll to let us know which of these would work for you. All of the... Read more

Replacing windows is expensive and comes with high impacts, but simple films can improve performance.

BuildingGreen-Approved Films

BuildingGreen approves three types of window films:

Energy... Read more

The AIA New Orleans 2030 Committee is running RISING21 this week, November 11th and 12th from 1:30-5:30pm ET. This is the second year of these sessions that aspire to advance awareness and knowledge around climate and access to affordable energy among practitioners from the AEC industry. We invite architects, MEP professionals, interior... Read more

Welcome to the quiz portion of Why Post-Occupancy Review Is the Future of Design (And How It Can Serve You Now).

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the importance of post-occupancy evaluation (POE) for occupants and the opportunities in POE for architects.... Read more

Plug loads—the energy consumed by plugged-in devices—can use a substantial amount of the total energy in both residential and commercial buildings.

BuildingGreen-Approved Controls

BuildingGreen approves products that monitor and reduce electricity use for plugged-in electrical devices.

Plug Loads and Energy Conservation... Read more

ASHRAE 209 in all its glory has been uploaded. This will impact our architectural process, for better or worse, so we should embrace it and learn from it. The revised AIA Energy Modeling Design Guide (due out next year) has been timed to correspond roughly to 209 coming out and will include references to it. The first few energy modeling '... Read more

Hello Everyone,

We wanted to share the highlights and take-aways from the large firm Sustainable Design Leaders (SDL) 2020 Winter Summit at The Lodge at Gulf State Park, AL. Additionally, this was the first year we had a pre-summit workshop for the winter summit. Our amazing workshop facilitator, Julie Huffaker from Deeper Funner Change... Read more

Hello Gurus,

I’m writing to share with you an effort a small group of lighting designers from the Boston area started which is now rolling into a large scale effort.  We’ve put together a Lighting Advocacy Letter to accelerate the sustainability of lighting products. Inspired by the AIA Materials Pledge, the letter is intended to... Read more

Welcome to the quiz portion of How to Spot Greenwash--A BuildingGreen Webinar.

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand the characteristics of quality standards and certifications to help screen out greenwash.
2. Recognize strengths and weaknesses of... Read more

Hi SDL: Please see attached letter to USGBC about the urgent need to address climate change in the next iteration of LEED v4. It's based on the realization that in the last few years it has become clear that climate change has become the dominant global threat to humans and our fellow species. And it has also become clear that the steep... Read more

Hi Fellow SDLers: I'm sure you're like me and thrilled at the news of the Senate's passage of the historic climate bill yesterday. And also are likely on pins and needles until it's passed the House and signed into law. What a conclusion of a terrible roller-coaster ride that is our Congressional system.

I'm writing to pass along a... Read more

Hi, all - 

Thanks to many folks who connected on the heels of our last matchmaking post. Reaching out on behalf of a former SDL member, Lindsey Perez, to relay an opportunity from MIRACORP linked below: 

https://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=97753&clientkey=957B67314D085A633E5C9C5568F3BC04 

I am getting started on a research project to evaluate the feasibility, costs, and benefits of using phase change material (PCM) to passively regulate temperature in Minnesota buildings. If anyone has experience designing with PCM, installing PCM, or occupying buildings with PCM, can you share any lessons learned that would be relevant as... Read more

In order to successfully contribute to a LEED project, it is important to have an understanding of how the LEED process integrates within a typical design and construction schedule. Every new construction or renovation project, whether large or small, moves through certain project phases beginning with design development, design completion (... Read more

As we begin to look into Scope 3 emissions reduction strategies, it's important to understand ways to reduce tranportation emissions to project sites. Is anyone aware of best practices or programs for contractor carpooling to jobsites? I know many of my colleagues travel to work together in one vehicle because of parking limitations, however,... Read more

I'm happy to announce the Call for Presenters for this year's Gulf Coast Green, taking place in Houston May 17th.  Our theme is Crossroads: Inclusive Exchange.  We are especially seeking presentations that focus on how design can engage the community and foster social bonds and social justice.  I’m sure many of you have work that is relevant,... Read more