Championing the
Changemakers

Happy Friday, SDL!

We're running a Tally WBLCA for an environmental education center, which has a very small floor area but a fairly robust concrete/steel structure. Still, I was surprised to find an intensity of over 1,000 kgCO2/m2 for the building.

This is way higher than the general benchmarks I've found in the CLF's database,... Read more

Lisa Richmond

Has anyone used Insight for Revit to document the LEED Daylight Credit If so, would you recommend it?

Thanks,

_Ilana

Hi Everyone,

Who has worked on a SITES certification and can share the approximate hours involved for administering and completing documentation? A relative sense of the effort compared to LEED would also be helpful, similar to the thread about WELL on this same subject. 

Appreciate any insight. Thanks! -Hilary

Huge shout out to Patty Lloyd, Luke Leung, Janet Olsen, and Sarah Gudeman for their webinar on the Power of Peer Networks. They share lots of insights into the value of participating in BG Peer Networks and many others. Ten bucks to Illinois Green gets you access to the recording--I loved it. What would you have said that they didn't?

Is anyone else working on a project doing Living Building Challenge v4.0 Energy Petal? We're working through the Imperative 08 Net Positive Carbon Resiliency Strategy requirements that ask for the project to be habitable for a week in the event of an emergency. We're curious how others are defining "habitable" and what systems assumptions... Read more

Welcome to the quiz portion of LEDs: The Future is Here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Restate the energy efficiency and long service life of LEDs.
2. Describe basic LED components and how, when assembled, they perform differently than traditional light... Read more

Peter Yost (at https://building-wright.com/ )  is available to provide building science expertise, trainings, public speaking, building investigations, and more. Learn more

Does adding solar panels reduce a building's EUI?

Existing operational use of a building is 80 kBtu/sf/year. When we add solar, it will change the source of energy but does not change the usage.

My understanding is that the EUI does not change, but it would be good to hear from others.

It's energy consumption at the point... Read more

BuildingGreen is the most trusted voice in sustainable design and architecture.

This ad-free, member-supported resource is here to guide designers in using high-performance strategies, and in selecting sustainable and healthy products.

If you haven't already, start by creating your unique user profile to get your log-in, and be... Read more

Following up something I mentioned at the summit - the EPA is hosting public comment webinars related to the IRA and construction. The first one seems particularly relevant, 3/2/23 from 2-3.30pm EST “Reducing Embodied GHG Emissions: Construction Materials Prioritization and Environmental Data Improvement”. Good opportunity to have our voices... Read more

Hi everyone, 

Following November's SCL Summit, I put together a model Construction Waste Management Action Plan based on the ideas shared in our focus group. It is linked below in Google docs, so everyone should have access to live edit the plan. Please take a look and add comments if you can. It's a very rough outline, so we can... Read more

In order to successfully contribute to a LEED project, it is important to have an understanding of how the LEED process integrates within a typical design and construction schedule. Every new construction or renovation project, whether large or small, moves through certain project phases beginning with design development, design completion (... Read more

Hi all,

Later today, we will be delivering the BITuser development site ready for content input. Andrea has created instructions to help get you started.

We would like to set up a few editor profiles for you. Could you let us know who should have a profile for content management? We need first and last name and an email.

... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Notes and Guiding questions here--please add your own!

2030 Commitment Check-In: Is it leading to more awareness and better outcomes on projects?

Is energy modeling and tracking going to get us to zero by 2030?

Is it effective at driving all projects across a portfolio?

What are firms getting out of reporting... Read more

Hi all,

I had a position listed for a Sustainable Design Coordinator which we have down for the moment as we've taken on a fall intern instead. In the interim, however, I did have a couple of great candidates that I'd like to help find good matches. One of those candidates is Marissa Lantieri, see her resume and portolio attached.