Championing the
Changemakers

I was wondering if any design or contractor friend here can kindly share the carbon emission factor of excavation during construction. 

I found a paper that provides energy use rate per cubic meter and associated carbon emission in kgCO2 for different phase of construction such as excavation earth work, pouring and lifting concrete,... Read more

Welcome to the quiz portion of The Four Core Issues to Tackle for Resilient Design (And the Programs That Can Help).

Learning Objectives
Upon completing this course, participants will be able to:


1. Use site-specific hazard analysis to evaluate a project’s resiliency demands.
2. Use climate change data to... Read more

Has anyone here found an alternative to XPS for the void former?

A structural engineering contact was included in recent conversations about embodied carbon in insulation materials and brought to our attention that this is a common use for XPS that has nothing to do with its insulating properties. It is typically used where concrete is... Read more

Wood decking requires potentially hazardous preservatives and stains, and plastic waste is a significant environmental problem.

BuildingGreen-Approved Decking

Composite decking approved by BuildingGreen has at least 50% total recycled content. For plastic decking, post-consumer content has to be greater than 50%.

Health and... Read more

Has anyone had any success with achieving the LEED Building Envelope commissioning points with an alternative compliance path using the requirements of the PHIUS verifier? It seems like an unnecessary duplication to ask the client to pay for a BECx agent and a Passive House verifier. Or am I missing something? I can't find any LEED... Read more

Hey All!

One of the initiatives from our first meeting in Chicago was to gather and develop resources related to plug and process loads in buildings which will help us all with: energy modeling, equipment sizing and power distribution.  We had our first call this morning and are rolling.  Aspirations are that this could turn into a... Read more

Please share this info with any contacts you have that you think would be a good candidate for our Design Performance Coordinator position -- Thanks!

Design Performance Coordinator in San Antonio

The EC3 Tool has come up quite a few times in the Green Guru's conversations.  We're hosting an online review with Stacy Smedley and Mark Chen from Skanska.

Wednesday September 29th at 3pm PST

The tickets are free and this will be a Teams meeting.

https://www.eventbrite.com/e/using-the-ec3-tool-the-why-and-how-tickets-...... Read more

Hi, all.

Has anyone used Unicel's Timber Curtain Wall System? It uses engineered glulam wood mullions on the inside with aluminum mullion caps / butt joints. Has anyone gotten close to using it, but couldn't get it procured for a particular reason? They note up to 72% more energy efficienct than a conventional aluminum curtain wall and... Read more

There are so many great contractor-related sessions at Greenbuild this year! I doubt I'm alone in trying to choose between sessions.  

Is there interest in debriefing with SCLers the week after (say Novemeber 9th at 2pm ET?). We could share the golden nuggets from the sessions we attended, saving everyone from wading through the session... Read more

We are hiring! Please share with any potential talented and passionate candidates.

https://archinect.com/jobs/entry/150052970/sustainable-design-specialist

ps. And, yes we recently rebranded for our 40th anniversary for those who may be confused :) 

Hello SDL-ers - 

The SDL Climate-Smart Wood Group hosts a monthly online forum for builders all over North America who care about wood - and if that sounds like you, you're invited! As builders, we want to advocate for the conscientious use of wood as part of a holistic commitment to climate justice and resilience. We have been meeting... Read more

Hello Green Gurus!

We have some exciting details for the next All Peer Networks webinar on Design Agency & Civic Engagement: Building Sustainable Communities.

REGISTER HERE - Hope to see you there!

Design Agency & Civic Engagement: Building Sustainable Communities
June 25th, 2020
3pm - 4pm ET (Noon - 1pm... Read more

Greetings, SDL network - We are attempting to resolve an issue with how data center projects calculate baseline EUIs for the AIA 2030 Commitment and could use some help from this network. With projects that comply with code prescriptively (i.e. not energy modeled), we have found the default baseline assumptions within the DDx platform are not... Read more

Welcome to the quiz portion of Fundamentals of High-Performance Building Assemblies.

Learning Objectives
Upon completing this course, participants will be able to:


1. Recall how the acronym ENDURE speaks to the unifying aspect of high-performance buildings.
2. Describe how to apply the principles of high-... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Buildings aren’t garbage. But you wouldn’t know it by examining the way the AEC industry works. 

We typically design buildings for a single, limited purpose. We build them partly out of plastics that can’t be readily recycled. We choose diverse materials... Read more

Hello and Happy New Year!

I joined the SAL Peer Network a few months back and I’m really excited to be part of this group, although a bit delayed in my introduction. I’m an architect working as a consultant and managing the Sustainability Department at Entegrity (an energy and sustainability consulting firm) located in Arkansas. I’ve... Read more