Championing the
Changemakers

I have been asked to recommend folks to join the AIA’s Framework for Design Excellence.  The AIA Framework for Design Excellence is basically the top ten toolkit, that has been rebranded by the AIA and is forming the backbone of much of the policy that the AIA is currently setting.

From the AIA's website:

Testing web-to-lead to existing contact in Salesforce.

Hi folks,

It came up on the Regional Leaders call this week that many people aren't aware that we added a link to the BuildingGreen Communities in footer of BuildingGreen.com. So if you want an easy way to get to the forum page, other than clicking on a link in an email, there it is! (Thank you, Stephen Endy!)

The footer has a... Read more

Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon construction, however, may be less familiar. 

Contractors are just... Read more

We're wrapping up a multi year project that went through multiple design changes, leaving us with a ton of material samples.  Does anyone know of a good place we could donate these samples to, to keep them out of the landfill.  I'm in the greater Seattle area.  Thank you for any suggestions.

Evaporative coolers use far less electricity than conventional refrigerant-cycle air conditioners and they operate without the use of refrigerants, both features that make them attractive for green buildings. However, their suitability is limited to drier climates, and most products use significant quantities of water.

BuildingGreen... Read more

Welcome to the quiz portion of Embracing the Economy as a Design Challenge!

Learning Objectives
Upon completing this course, participants will be able to:


Understand the ways that architects, community developers and others are experimenting with new financial models to support progressive design.

Approach... Read more

Hi All,

Attached are the meeting notes from the Carbon Group's 2/26/20 -- also in the PDF are the slides presented in the 2/26 meeting.

Before our next meeting in late March/early April, we are looking for input on the following topic related to tracking and reporting carbon:

Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

We had so much fun at our Contractor coffee talk that I reached out to our MEP friends to see if they would set up something similar.  And they have agreed to host a talk on Thursday December 2, at 1-2pm EST.  They will talk about decarbonizing buildings, on a schedule that keeps us under the 1.5° C limit and will also address strategies for... Read more

Hi folks,

I’m sure most of you know Gail Brager, or at least know of her. For those who don’t, she helps run UC Berkeley’s Center for the Built Environment and is a long-time champion of all the things that make buildings work for their occupants. Perhaps most notably, she was a co-author of the Adaptive Thermal Comfort option in ASHRAE... Read more

The current Stantec/BuildingGreen featured topic is Material Health. Read on to learn the essentials, and then dive deep to earn CEUS.

Also see the Resilient Design featured topic, and also a survey of topics trending in Stantec’s regions.... Read more

Hi All -

I am looking for recommendations for a car charging station for a Catholic convent project we are working on. At this time, the client has requested either 2 charging stations or one station that can charge 2 vehicles. I've been researching chargers and am thinking that it does make sense to specify a commercial-grade charging... Read more

Does anyone know about temporary flushout equipment that could be used to augment a building's systems to get additional CFM of OA during construction?  For our non-laboratory type projects the flushout period ends up being too long, especially in either humid summers or frigid winters (Pennsylvania).

Hoping that some of you on either... Read more

EDITED LINK

Hello, below is a link to our newly uploaded research report, Embodied Carbon in Commercial Furniture. This new research report introduces a case study and some new baselines for measuring the carbon footprint of commercial furniture, to add to a growing body of work on this topic among our peers:
Embodied Carbon in... Read more

SDL Group -

Hi all!  After a brief hiatus from the group to move from New Orleans to Portland (OR), start a new job at ZGF Architects, buy a house, and  see my baby boy become a toddler (all in the past year!)---- I'm ready to plug back into the group.  Seeing folks at the ILFI conference re-energized me to reengage :)

So…..does... Read more

Hi all,

The Sustainable MEP Leaders are assembling an industry push to expand the availability of embodied carbon data for MEP equipment. Our first steps are to send a letter to industry announcing a call to action and future educational webinars on the topic, the current draft letter is attached. In a similar manner as the... Read more