Championing the
Changemakers

A couple questions for this group. I know we're having a Green Commons meeting on this next week. But can anyone comment on the following questions?

-Have you or your firm split the benefit of the 179D with a client? Is this typical?

-Is prevailing wage a requirement for all 179D benefit, or does it follow the same lines as... Read more

In order to successfully contribute to a LEED project, it is important to have an understanding of how the LEED process integrates within a typical design and construction schedule. Every new construction or renovation project, whether large or small, moves through certain project phases beginning with design development, design completion (... Read more

SDL Group -

Hi all!  After a brief hiatus from the group to move from New Orleans to Portland (OR), start a new job at ZGF Architects, buy a house, and  see my baby boy become a toddler (all in the past year!)---- I'm ready to plug back into the group.  Seeing folks at the ILFI conference re-energized me to reengage :)

So…..does... Read more

We are cautiously rekindling the age-old debate: how are we balancing modeling software for design /visualization and performance analysis during early phase of design.  

We are heavy SketchUp users for early design, and most of our staff have access to COVE tool for early performance analysis. Problem is, I’d rather use Revit to COVE... Read more

Hi folks,

We're currently scoping out a BuildingGreen report on how the global market for recycled/recyclable materials has changed over the years, and what that means for waste management practices in construction, and for the availability of recycled content materials. 

This ties into the goal from the SCL Summit about LEED... Read more

Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

Wall and corner guards increase durability, but these products are typically made of PVC.

BuildingGreen-Approved Guards

BuildingGreen approves products that avoid the use of PVC and are made with recycled content, FSC-certified wood, other biobased materials, or less-problematic plastics. 

Health and Environmental... Read more

Fellow SCLers,

This is a small ball item, but I recently had a conversation with a safety glove manufacturer called Traffi. They make PPE, but in particular they have a line of gloves that they promote as carbon neutral. Their organization's operations are offset with retired RECs, but one line of their gloves, LXT, is offset by a... Read more

Hello SDLs!

Many of you have internal research groups or internal grants to foster thought leadership in your firms.  We have run an annual research-innovation grant program for about the last 5-6 years.  Anyone in our firm is allowed to apply, submit their idea, the time/budget they need, define a deliverable and then a small group... Read more

Does anyone have a recommendation for software that helps organize and track product and material selections for projects? 

Thanks!

Hi All,

I wanted to share a program of superstars including many of you.  I look forward to electronically connecting and learning together.

Every Monday from June through August, the Boston Society for Architecture (BSA) and the Carbon Leadership Forum (CLF) Boston Hub will present Embodied Carbon 101, a 12-part program series in... Read more

Has anyone worked with Vidaris for LEED certification and have a contact there? If you want to direct email me with feedback on the experience that would be helpful as well.

https://www.linkedin.com/company/buildinggreen/jobs/

Welcome to the quiz portion of Seal, Tape, Gasket: A Sticky Search for Better Materials.

Learning Objectives
Upon completing this course, participants will be able to:


1. Choose the best means of achieving barrier continuity for any given application.
2. Assess a joint sealant's service life and product... Read more