Championing the
Changemakers

Hey there SDLs!

We're having a debate in our firm about whether we're at a tipping point to hire an in-house energy modeler - someone capable of doing an MEP-caliber energy model inside a design firm. I know some you have in-house energy modelers on staff and I'd love to hear your experiences:

- How did you know your firm was at a... Read more

Nice brief article on how to talk to clients about materials transparency. It was the right level of information to send out to the office at large. Kudos to Lona and Ralph for your contribution.

https://www.aia.org/articles/210821-how-to-talk-to-clients-about-materials-tran

Hi folks,

USGBC has commissioned this survey of the building industry about Federal tax incentives for building efficiency. They will be sharing results with congressional staff, so this might be a good opportunity to give them feedback from the field!

And it's just 10 minutes.

And, after you do the survey if you want to... Read more

All,

We are collecting examples of buildings that involved electrification initiatives (building does not need to be all electric as long as largely electric). Please share your projects with us through this short survey. It will take 8-10min to complete.

The study will culminate into a report and best practices to advocate for... Read more

We apologize, but the heating fuel cost calculator is no longer on the BuildingGreen website.

Take a look at Efficiency Maine's heating fuel cost calculator instead.

Hello Sustainable Construction Leaders,

In years past, we've hosted an SCL Summit the day before Greenbuild. We'd like to get back to that model, but we also know that there are many other demands on your time. Before we get too far into planning we're asking you to please fill out this quick survey to let us know if you could/would... Read more

Hi All,

I just became aware of the attached detail (if I uploaded it correctly) for a project in Portland, OR going out for permit at the end of this week.  Has anyone located the radiant tubing at the bottom of concrete like this before?  It doesn't sit right with me, though I cannot pinpoint exactly why.  Our consultants and the... Read more

Hi all,

Our team has been working hard to wrap up this year's SCL Summit Report, and we're excited to announce that it is finally complete!

https://docs.google.com/presentation/d/1zcSPctZ1BiyPQomiw4wTQLajR816mm3KJV0BL5B14-0/edit?usp=sharing

In addition to the usual summary of key points from the summit, this report captures... Read more

Anyone has experience with CertiPUR-US? I’m having a hard time finding assurance documentation for foam padding for seating.

I would appreciate any feedback or experience on CertiPUR-US program or any recommendations on product.

Greetings, All.

The Resilient Outcomes Working group has been putting together a resource list (and map) of resources for supporting resilience-focused design across the US.  So far, we have around 50 resources on the list, ranging from the AIA Resilient Design Toolkit to local Vulnerability and Adaptation reports and tools.

We... Read more

Hi Green Gurus,

A "fun" take-away from the sustainable MEP Leaders Summit (just ended today):

Inspired by Passive House, we are embarking on a campaign: "Low Load Buildings Are SEXY".

One idea we have is:  what if the AIA design awards set limits on metrics like heating loads to meet basic eligibility?

If you have... Read more

Plug loads—the energy consumed by plugged-in devices—can use a substantial amount of the total energy in both residential and commercial buildings.

BuildingGreen-Approved Controls

BuildingGreen approves products that monitor and reduce electricity use for plugged-in electrical devices.

Plug Loads and Energy Conservation... Read more

Welcome to the quiz portion of Occupant Engagement: Where Design Meets Performance.

Learning Objectives
Upon completing this course, participants will be able to:


1. Restate at least five methods being used to provide feedback to occupants so that they better understand how to interpret, and respond to, their... Read more

Has anyone used the new 3M Smog-Eating Granules on a roof before? Malarkey and Soprema are offering this as an option for their roof shingles. Seems like a great technology for urban areas, but I'd be curious to see if anyone here has actually successfully specified and installed it.

https://www.3m.com/3M/en_US/roofing-granules-us/... Read more

Who else missed Building Green’s annual April Fool’s issue?

Can anyone recommend waste haulers and processing facilities that are LEED compliant for processing commingled waste in the DC / MD area?

I know this is the Sustainable Construction Leaders and not the LEED Construction Leaders, but with waste management being such a big part of what we do, I wanted to crowd source a request for help.... Read more

Hello,

As with most people I feel some what helpless about what the next 4 years will bring. Heather Clark, Senior Director for Building Sector Climate Policy at The White House thinks that a big bill will be presented in the new year and one of the small items in there will be the axing of the Inflation Reduction Act. What she made... Read more