Championing the
Changemakers

Hi all!

I'm working on my first energy positive / passive house multifamily building and trying to figure out the trash/recycling chute. I am curious what solutions you have employed to make the trash chute air tight? We have excluded the whole chute from the envelope. Do you use airtight doors (and which ones?) at each floor trash/... Read more

Happy Friday Everyone!

Hoping to add a bit of excitement to the end of your week: 

Here is the Sustainable Design Leaders 2020 Summer Summit Report. 

Enjoy!

RoseAnn for Nadav, Candace, and the BuildingGreen team

Welcome to the quiz portion of What You Need to Know About Concrete and Green Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Recognize concrete's environmental footprint and how to reduce the quantity of concrete used in buildings.
2. List the advantages and... Read more

The BuildingGreen Guide to Thermal Insulation provides detailed guidance on insulation products and practices, including recommendations on what insulation to use and what to avoid. It's a treasure trove of information for architects and designers, builders, and anyone who is actively considering the impact of insulation on the quality of your... Read more

This might be going down a rabbit hole, but in moving to California this year I noticed that "zero net energy" (ZNE) is the standard term, whereas "net zero energy" (NZE) was more common back east. The DOE's 2015 definition (below) uses "zero energy building" (ZEB), which to me implies a building uses no energy at all.

Regional... Read more

Related to some recent questions on site-specific sun/wind analysis and early energy modeling tools, are there any tools that account for nearby topography (like bluffs) or large buildings/vegetation in energy calculations? Or favorite methods to estimate its impact particularly during early massing studies?

Thanks,

Rachel

Hello fellow Green Gurus! 

I am very thrilled to share this news. "Global architecture, design and planning firm HLW is pleased to announce BEYOND, a cutting-edge sustainability consultancy working across the built environment to drive higher standards for sustainability, resilience, and building performance."

Please click here to... Read more

Happy Friday, SDL!

We're running a Tally WBLCA for an environmental education center, which has a very small floor area but a fairly robust concrete/steel structure. Still, I was surprised to find an intensity of over 1,000 kgCO2/m2 for the building.

This is way higher than the general benchmarks I've found in the CLF's database,... Read more

I just saw this post from Conor on LinkedIn.

Starting in January 2019, all new Columbia Construction Company projects require LED temp lighting.

Are others doing this too? Frankly, given all the benefits and how quickly the industry is matured, it's hard for me to understand why anyone would use anything other than LEDs on a job.... Read more

Hello,

We're trying to budget Fitwel Certification consulting fees for a non-profit client for whom we're designing an early childcare center in Louisville, KY. It would be for a single tenant new building Fitwel certification and include a Fitwel introduction workshop, working with design team, and coordinating/submitting documentation... Read more

I'm looking to compare using an electric tower crane vs a diesel generated tower crane.  I've got the average gallons/hour for the size of crane I'm looking at, but when I reached out to the crane manufacturers, they can only tell me what size electric supply I need to provide, not the kWh usage for the cranes.  I know that it varies depending... Read more

I took a first pass at content for the Energy Audit best practice, see the uploaded file. 

Welcome to the quiz portion of Wood: What’s Good?

Learning Objectives
Upon completing this course, participants will be able to:


Apologize in advance if this has been posted before but we are trying to get manufacturers of stage curtains to give documentation that proves that the product does not have halogenated fire retardants. Manufacturers say they don't have them or concentrations are limited to 100ppm but they don't seem to have documentation to provide for it.... Read more

I know there are a few of us WELL Performamce Testing Agents / Organizations represented in this group. In the wake of technology talks on this weeks update calls from IWBI, I'm wondering if anyone would be interested in a best practices and equipment small group discussion within the safe space of Green Gurus? Let me know! 

Does anyone here have a draft spec for low embodied carbon concrete they could share? I see the GSA has a standards sheet with MGWP limits, but we are hoping to actually specify the mix for upcoming projects.

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Stick-framed walls are labor intensive and have to be sealed and insulated in the field, where conditions are not ideal; this can lead to poor thermal performance.

BuildingGreen-Approved Structural... Read more