Championing the
Changemakers

Hi All, this is primarily directed at our Sustainable MEP folks, but please anyone with insight feel free to weigh in.

I am increasingly seeing designs and specifications asking for Passive House levels of airtightness as verified by blower door testing, but with traditional ventilation system designs. 

To me, Passive House US has... Read more

Has anyone developed a disclaimer to be issued with LCA models and reports? I have been asked to look into developing a disclaimer to be used with LCAs, and unfortuantely I have not been able to find past precedence on this. 

Thank you,

Stephanie Fargas

Dear Green Gurus,

I both regret and am excited to tell you that I am leaving this group to pursue my next adventure.  I'm stepping down as Kirksey's Director of Sustainability, moving to Tucson, and starting my own business.  My business plan is to buy existing buildings, renovate them to net zero, and then sell or rent them.

I... Read more

Since attending the SDL Summer Summit this year, I've continued soul-searching for more actionable firm-wide, walk-the-talk Climate Initiatives to push forward and sheepishly realized that our office operational emission accounting (and potential offsets) has literally fell off the radar. Since 2008.
:(

So my query:
1. Are... Read more

There are a few spots left for the 2018 Summer Architecture + Design Sustainable Design Leaders Summit that is being held August 1-3 at the Garrison Institute in Garrison, NY (Easy train ride from NYC). If you have not already received an invitation, and you play a sustainability leader role - either formal or informal - in a mid-sized (>40... Read more

I am diving back into Sefaira for the first time in a while, and the program still seems to be missing the ability to account for automatic daylight dimming in energy savings. Previously I had used an LPD reduction equivalent to emulate the savings automatic dimming would provide. Has anyone done a similar work-around? 

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Should housing be affordable? Or should it be sustainably designed, built, and operated?

When you put it like that, the question sounds absurd.

But the idea—usually unspoken—that sustainability wastes precious time and resources is painfully common in the... Read more

Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

CEUs are available for reading our entire plumbing guide. Click here to learn more and take the quiz.

Constructed wetlands and other natural filtration systems close the nutrient and water loop, permitting safe and sustainable wastewater treatment and reuse right on the site.

We look for... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Welcome to the quiz portion of The Building Envelope: Innovations in Planning, Materials and Budgets (recorded webcast)

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how to make the building envelope of a rehab super-insulated and resilient.
2. Recall innovative... Read more

Calling all Sustainable Design Leaders - Coming up on March 1st, we’re hosting a virtual SDL check-in. We’ll have a round of five-minute presentations as well as a refresh of the SDL Steering Group.

Quick point of clarification: For those who’ve been around for a while, you may remember this group as the “SDL Regional Leaders”. As we’ve... Read more

Hey Peer Network! Curious, if we can crowd-source a solution here for the pervious pavers at our Omaha office (climate zone 5A). Apparently over the years we've tried to add different kinds of fill here (gravel) but it keeps... disappearing. Any recommendations with either a replacement product or fill item? 

Hi Everyone, 

Our Vancouver team is looking for some innovative, high performance  building retrofit case studies. We are have been retained to retrofit a significant heritage building in Vancouver and the client has a net zero carbon institutional goal. As such we are looking for some innovative precedents that will provide design and... Read more

Hello SCL, I was asked by a friend at ILFI to share this invite specifically to the SCL group to join their Living Future 20 conference which is in a couple weeks and will be all online.  There is also an invite for a construction-only focused ILFI discussion May 14th in the message as well.  Hope everyone is doing alright out there.  Talk soon... Read more

I'm just wondering if anyone is using GBCI's Better Materials site as their go-to source for transparency and healthy materials.  Having all the search engines on one platform is great in theory, and I keep hoping that it will be the one-stop site/resource that I can get all our designers to use.  Unless I'm missing something though, it still... Read more

I understand the AIA 2030 team is hoping for as many firms (and projects) to submit some form of LCA data in the new DDx website this week, in order to learn how the industry is tracking embodied carbon.  We have four projects that dabbled with Tally last year, which we'd like to report this week.

Has anyone run into a hurdle where you... Read more