BuildingGreen Report

Forum topic

Hi all!

I've heard several people talk about developing tools for assessing/codifying a client's values for a project as part of an integrated design process (ie. a set of questions, survey, etc.). Would anyone be willing to share?

(Z, are you listening? I specifically recall you mentioning a tool like this...)

Thanks!... Read more

Forum topic

Hi folks,

On today's call James Peterson will be introducing a conversation about how COVID might have changed our ways of working.

If there's time afterwards, we can take a look at this draft article from the USGBC research team. They're interested in our input on how we might want to analyze the info on electrification rates in... Read more

Forum topic

Hi all, has anyone come across a comprehensive (and recent) study looking at how long buildings actually last (beyond Stewart Brand)? I know of plenty that look at the benefits of reuse, but none that look at existing building stock and how much has been reused vs. demolished. 

As we start looking at embodied carbon metrics, I can't help... Read more

Forum topic

I’m writing to see who would be interested in collaborating during the month of December on a position paper that would be given to the incoming Biden administration, outlining things that firms in our industries (i.e. architecture, engineering and construction) would be excited to see advanced as part of Biden’s Build-Back-Better (BBB) program... Read more

Basic page

The 2019 Summer SDL Summit has reached full capacity.

 

For questions and/or to be added to the Summer Summit waiting list, please email Jerelyn Wilson directly.

2019 Summer SDL Summit
Islandwood, Bainbridge Island, WA
July 31st- August 2nd, 2019

Forum topic

This is a bit off the thread of sustainable design leadership, but how much design and/or leadership can you get done without an adequate amount of caffeination?

We are looking for recommendations and advice on improving the sustainability of our breakrooms, particularly on the subject of beverage (mostly coffee, but also a fair amount... Read more

Product Guide

Furnaces heat air that is then distributed through ducting and warm-air registers.

Approved by BuildingGreen

Products approved by BuildingGreen include the highest-efficiency, sealed-combustion furnaces and high-efficiency wood or multi-fuel furnaces. A multi-fuel furnace uses several sources of energy such as wood, wood-pellets,... Read more

Forum topic

Hi SD Leaders,

As you may be aware, this past April a group of manufacturers calling themselves the Living Product 50 responded to the letters that many of us sent about five years ago advocating for transparency in their product ingredients.  A copy of that letter can be reviewed about midway through the page at this link:  https://... Read more

Forum topic

Sharing the below message from Mike McMeekin, who some of you know, regarding his current initiative, the Engineering Change Lab USA Climate Change Noble Purpose Statement. (Also, here is a Link to today's LinkedIn Updates on this topic.)

Greetings, I am re-sending my email from last week primarily as a reminder regarding the sign-up... Read more

Forum topic

Does anyone up here do or have familiarity with anyone who regularly does NEPA EIS? If you need a definition for the acronym, please see here: https://www.epa.gov/nepa/national-environmental-policy-act-review-process#EIS. I've been asked if I know anything about it, to which the answer is no, but I'd like to get smarter about it and I'm hoping... Read more

Forum topic

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

Quiz

Welcome to the quiz portion of Five Reasons to Be Optimistic About Solar Energy!

Learning Objectives
Upon completing this course, participants will be able to:


Describe three ways how PV decreases environmental impact while increasing sustainability and health measures for communities.

Discuss PV life-cycle... Read more

Forum topic

We are growing our Design Performance Group at NBBJ! We're looking for two special people right now: a senior sustainable material consultant and a senior energy analyst. Help us design the next generation of healthy, low impact buildings - this is a chance to impact across the scale of our global company and build a better future! Know anyone... Read more

Forum topic

Happy Friday all! 

Arizona's USGBC's Fall Summit is coming up on October 5th and we are looking for another GC to speak on our 'Waste Diversion in Arizona Construction' panel. 

Here is the link to the event: https://www.eventbrite.com/e/usgbc-arizona-fall-summit-2023-tickets-6776...

It's going to be a great event starting... Read more

Reports, Courses, Study Guides, Live Webinars

Returning to work: for many, it’s unthinkable without some kind of reassurance that leadership and the facilities team have taken all possible precautions. Lots of organizations are weighing in on what we should pay attention to, but how do we know if it’s working?

The free Re-entry program from Arc is a tracking and measurement... Read more

Forum topic

All,

The current version of the program manual includes ID numbers for the best practices, as shown below. I know we want to keep a quick reference number or ID, but though it would be worth asking if we want to use the below, reorder them in some way, or use a different kind of ID. Opinions?

Thanks,
Jenny

--------... Read more

Forum topic

What’s the net present value of that extra insulation? Join us on Tuesday, June 25th at 2:00 pm Eastern for a Peer Networks webinar on “Balancing Embodied and Operating Carbon.” Bill Smarzewski and Jason Fierko of Ewing Cole have developed a method for combining energy modeling with embodied carbon data to determine the carbon “payback” of... Read more

Quiz

Welcome to the quiz portion of Deep Dive into the Integrative Process with Marcus Sheffer (recorded webinar)

Learning Objectives
Upon completing this course, participants will be able to:


Define “integrative process,” understand its role in LEED BD+C v4 and v4.1, and leverage its power to promote advanced sustainability goals... Read more

Forum topic

All,

I'm looking for a quick methodology to estimate GHG emissions from refrigerants on a per SF basis. Are there any benchmark studies or quick calculators similar to the embodied carbon study? https://carbonleadershipforum.org/embodied-carbon-benchmark-study-1/

Thanks,

Josh