Championing the
Changemakers

Hi everyone - in doing a carbon footprint for our firm, does anyone know if buildings that we design as Architects considered scope 3 emissions, or are they beyond the boundary of emissions? LMN's buildings, despite best efforts, are cumulatively multiple orders of magnitude above our scope 1 and 2 emissions. We have never included these... Read more

First, there was Energy Use reductions

Then there was embodied carbon

Soon it will be refrigerant use/leakage calculations

…and much more

As coordinators and leaders of project teams, what does this look like for the practicing architect and our collaborators?

I have no idea. BUT I’m guessing someone is... Read more

Water and electrical metering and submetering equipment provide valuable diagnostic information and verification of building energy and water usage.

Measuring Water Use

The Alliance for Water Efficiency recommends metering all new connections, retrofitting meters onto existing unmetered connections, and submetering all new... Read more

Hi all,

I'm curious if anyone has insight as to the "New Federal Building Performance Standards" that were announced in May of 2021 and then referenced again when E.O. 14057 came out. The memorandum for heads of agencies that was sent out with E.O. 14057 said that the CEQ would issue these standards, but I can't find a commitment to when... Read more

Hello lovely Green Gurus. Hope you all are well. I am wondering if anyone has installed an indoor sports floor that performed well and is low-emitting. This is for a multi-purpose gymnasium at a community center. Any chance?  Thanks All!

We have all these resources out here in the ether but it’s so hard to pull them into one spot! I was asked, last minute to join a client call today to help convince both the client (affordable housing developer) and the mechanical engineers to "stick with" a commitment to 100% electric design that was publicly stated when the competition was... Read more

How interested are you in a Sustainable MEP Leaders Summit this summer? 

Please respond to this poll ASAP, as we need to gauge interest before we finalize any details.

When: Wed. July 26 at noon to Thurs. July 27 at 1:30. 
Where: At a conference facility near Boston
Cost: $1200, which includes lodging, meals, and... Read more

Hi friends,

We recently tracked our water consumption on site during the structural demolition of some existing reinforced concrete buildings.  The new OSHA silica regulations required us to keep dust to virtually zero, so we had a bunch of mist cannons and water hoses pumping water around the clock.  We consumed ~855,000 gallons in a... Read more

A site license allows your entire organization to access and share the guide, and to keep a copy in your library.  

We’re excited to be releasing the 2020 edition of Spec This, Not That. 

... Read more

Welcome to the quiz portion of Why Post-Occupancy Review Is the Future of Design (And How It Can Serve You Now).

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the importance of post-occupancy evaluation (POE) for occupants and the opportunities in POE for architects.... Read more

Hi all,

We are looking to study Passive House on a couple small multifamily projects. Our understanding is that WUFI Passive only integrates with SketchUp at this time. Our BIM manager has been trying to find an example of a firm that works in Revit and uses WUFI Passive, to point him in the right direction on workflow. I offered to ask... Read more

We are looking at installing an aerobic biodigester in a commercial kitchen for an office client that is VERY concerned about zero waste.  Basically, this system takes food waste, treats it with micro-organisms to remove organic matter, and turns it into water of high enough quality to go straight to the sewer.  The manufacturer we are looking... Read more

Good morning all!

We're working on a higher ed project, and the university PM recently read an article about eco-friendly drywall and is interested in using it on the project.  We're currently using the USG EcoSmart drywall on another project and mentioned it as an option, but the article she forwarded also mentioned ExtremeGreen's MgO... Read more

Hi all,

We have a project in New Orleans that needs to meet the GSA Inflation Reduction Act (IRA) requirements and submit EPDs. For our concrete, there is only one manufacturer that meets the requirements and is more than 50 miles away (according to EC3). Does anyone have tips on attempting to talk to local concrete manufacturers about... Read more

Folks, it is with a heavy heart that I write this: Lance Hosey passed away unexpectedly on Friday. 

Many of you know him from the early days of the SDL group, or as an outsized presence at any of the many conferences where we overlap. He's been a list-maker, poll-taker and all around troublemaker in my life for over 20 years; I know I am... Read more