Championing the
Changemakers

How much will it cost to achieve LEED v4 certification?

“We’d love a green building, but can we afford it?”

“We’re required to be LEED Silver, but we’re not sure how to get there under the new rating system.”

“Sure, we’re interested in LEED, as long as it doesn’t cost extra.”

LEED v4 and cost uncertainty

With... Read more

Hi everyone!
I've seen a lot of claims over the years of living walls or planted buffers that can mitigate *outdoor* air pollution and have always assumed there's no real scientific basis for that idea, unless we're talking an actual forest that's 10s of feet thick. Am I wrong? Are there examples of living walls that actually have been... Read more

They say that Louisianans are often late to the party but enjoy catching up.  The state, which had been stuck on ASHRAE 90.1-2007 (commercial) and IECC 2009 (residential) and has just adopted legislation jumping to IECC 2021 / IRC 2021, and commits to automatic upgrades with each 3-year code cycle.  This means we join CA, OR, WA, MA, and VT--... Read more

I have a client that is very interested in automated shades for a mid-rise multi-family housing project. Do you have any examples of projects that have attempted this? I assume it would involve occupancy sensors and/or an over-rideable default setting dependant on sun position and temperature. I also have an MEP Engineer team that is having a... Read more

Welcome to the quiz portion of LEED vs. Green Globes: A Definitive Analysis

Note: If you are taking this quiz as a member of LEEDuser, please take the quiz here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Highlight the most significant differences between LEED and Green... Read more

Hi all, has anyone come across a comprehensive (and recent) study looking at how long buildings actually last (beyond Stewart Brand)? I know of plenty that look at the benefits of reuse, but none that look at existing building stock and how much has been reused vs. demolished. 

As we start looking at embodied carbon metrics, I can't help... Read more

Following up on one of our conversations on the vision vacuum and sustainability beyond certifications, I would like to help facilitate an offline conversation with anyone working within their firm to use the AIA COTE measures as a guiding framework in their firms/projects. Attached are my slides on my first pass at thinking about this at Page... Read more

Pipe that delivers domestic water in North America is typically made from copper, chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX), all of which present environmental challenges. Bimodal polyethylene  (PE-RT) and polypropylene (PP) are potential alternatives with lower climate and health impacts.
... Read more

Hello SCL,

Quick reminder to sign up for our SCL Summit in May! True to usual form, we ask what’s important to YOU before we finalize an agenda. In the next couple of weeks, we will be sending out a draft agenda and asking for your feedback. Sign up now so your voice will be heard. Initial ideas so far have included:

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

Hi all, 

I'm excited to announce that LHB (my 250-person multidisciplinary firm located in Minnesota and Wisconsin) is hiring a full-time Regenerative Design Leader. I thought this might be helpful for those of you looking for example job descriptions for your own postings, or if you are looking to make a move (we do have an office in... Read more

This is a bit off the thread of sustainable design leadership, but how much design and/or leadership can you get done without an adequate amount of caffeination?

We are looking for recommendations and advice on improving the sustainability of our breakrooms, particularly on the subject of beverage (mostly coffee, but also a fair amount... Read more

Hi All, 

The rural concrete supplier that is used for most of our projects sources their fly ash from a nearby coal burning plant that is scheduled to be closed in the next two years. In anticipation of this, they are looking into alternative fly ash sources and SCM options and we'd like to provide suggestions.

Does anyone have... Read more

Tomorrow is my last day at FXCollaborative before I head back to school. It has been such a gift to engage with you all over the past 10 years. Please stay in touch - my contact information is ilanajudah@gmail.com. I am headed out to UBC next week to do a deep dive into resilience and adaptation in urban environments.

FXCollaborative... Read more

Congrats, Kjell, on your elevation into the AIA College of Fellows! Much deserved!