Championing the
Changemakers

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Hey Team,

I'm in a Living Future session where a number of manufacturers are talking about the low uptake they're seeing in their take back programs. Contractor friends... What barriers (if any) are you running into in using take back programs? How might we as architects help increase utilization of these programs?

Aley

There has been a lot of discussion re antimicrobials in this group, so here is a pre-release of this month's article on the topic. It's not an extensive feature, but I hope you find it informative.

Brent

Beginning this year, Miller Hull will not only continue to quantify the upfront embodied carbon of every project we finish through construction, but now purchase third-party certified carbon offsets equivalent to one-third of the project’s impact. Great design is no longer enough - we must take responsibility for our architectural impact in the... Read more

Welcome to the quiz portion of The Chemicals on Our Carpets and Textiles.

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand when and where certain treatments may be superfluous or even pose unnecessary risks.
2. Recognize which applications might necessitate certain... Read more

https://www.linkedin.com/company/buildinggreen/jobs/

As BuildingGreen’s Content & Data Wrangler, Fran is a spreadsheet and content-management wiz who:

Fran also compiles data submissions... Read more

Blast from the past when 179D first hit the scenes.

Are any of you still using this and if so, has it been easy, successful, worthwhile etc

and Happy New Year !

Older buildings—especially those from the 1950s, ’60s, and ’70s—need our help. Many leave something to be desired in terms of aesthetics and comfort. But the truth is that they are part of the urban and suburban fabric now, and they aren’t going anywhere. As tempting as it might seem to tear them all down and replace them with high-performance... Read more

Hi folks,

With all the build-up to Greenbuild (don't miss the Tuesday Show-and-Tell if you'll be in town!), I nearly forgot about another opportunity, coming up sooner! A bunch of us will be in Cleveland in early November for the first Building Resilience conference that BuildingGreen is helping to organize with ILFI and the Resilient... Read more

I came across these open roles recently on Gensler's career page. Sharing them here if there is any interest in this group. As I understand it, though the roles listed are in NYC and NJ, they would be OK if the person reported to one of the following offices: NYC, Morristown, Boston or Toronto.

Sustainability Specialist – NJ: https://... Read more

Hi folks,

We often hear from you with a suggestion of someone who would be great for the network, and a question about how to refer them. We've now made that easy, with three steps laid out in an Outreach Toolkit that's posted in the left margin of the Member Directory.

So, if you're thinking of someone to invite or come across... Read more

Welcome to the quiz portion of "Spec This, Not That: Avoiding Toxic Chemicals in Commercial Building Projects"!

Learning Objectives
Upon completing this course, participants will be able to:


I am very interested to understand the deployment of LED temp jobsite lighting on a national level.  I think this all goes back to the low emitting jobsite.

1. Does your firm utilize temp jobsite lighting on your projects?  

2. Is this every project or a percentage of projects?

3. In your state or area is it prevalent, one... Read more

"The man with one watch knows what time it is; the man with two is never sure."   --Segal's Law

We recently purchased two indoor air quality meters in the $200-$300 range and find that they never agree, not even close. I would like to find out what other people's experiences have been, and if they have tested affordable models that... Read more

Great meeting everyone and very excited to work with you all.  Reminder about Tuesday night's homework assignment to support Sachin's efforts to upgrade the quality of our AE pipeline:  tell us why you got into this business.

While I was an undergraduate engineering physics major*, I had a partime job at a farm implement manufacturing... Read more