Championing the
Changemakers

Hello,

We are having a discussion / a bit of a debate in our office about the merits and sustainability of different roofing materials. Our current standard is to use a PVC membrane, which we all know is highly toxic. TPO is an obvious alternative that is less toxic, but it has some performance concerns and can often lead to leaking (not... Read more

I'm sure may are familiar with Aqua in Chicago, and Joe Lstiburek's article on thermal bridging. (https://buildingscience.com/documents/insights/bsi062-thermal-bridges-redux) We have similar problem with a project that is a residential highrise building, concrete structure. Here is my questions. Will energy simulation be able to pick up the... Read more

Hi all,

As follow-up to the summit, I’m attaching a draft letter on MEP embodied carbon written by our group (Luke, Kristy, Adam).  The goal is to start a dialogue with manufacturers to include embodied carbon info for major equipment.  Will explain more on the call.  Please read in advance if you get the chance!

Thanks!

Our firm was asked by a government client in Canada to update their specifications for concrete to capture low embodied carbon as a performance metric. From the SDL group's knowledge of concrete procurement:

You’ve probably heard that wood products are carbon neutral. You might also have heard that timber harvesting causes immense carbon emissions.

Which is it?

Could it be both?

Hi All - 

Has anyone explored hydronic system analysis software (1D CFD)? 

Some options are PipeFlo, AFT Fathom, PipeFlow (eerily similar name to first option), COMSOL Pipe Flow Module. 

Applications could range from general system troubleshooting, pump sizing, to district hydronic system network analysis. 

Best,... Read more

I'm going way outside of my skillset and comfort zone...venturing into HR territory to do an analysis of my company's benefits package to see if it meets exceeds or falls short of the requirements of Fitwel and WELL. Has anyone else done this within their organization? How was this received by your company's executive team?

When... Read more

Is there a way for southface staff or guest experts to "pin" or "tag" the "right" answer in a forum question? It might be useful to designate the right answer and pin it to the top of a forum thread. I don't want the answer selected via crowd source but by staff or volunteers. Thanks.

If you haven't seen it yet, today's U.N. report "Making Peace With Nature" tackles climate change, biodiversity loss, and pollution jointly within the framework of the Sustainable Development Goals. 

The analysis is anchored in current economic, social and ecological reality and framed by economics and the 2030 Agenda for Sustainable... Read more

Lake|Flato developed a project process road map as an internal project management tool over a decade ago, and we're looking into updating it.  It serves as a sort of "checklist" of major design, sustainability, and QA/QC milestones for each project phase.  I know we've talked about similar tools at other firms at past SDL summits, so wanted to... Read more

Welcome to the quiz portion of Go with the Flows: The Promise and Peril of Hygrothermal Modeling

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe the true role of hygrothermal modeling in design.
2. Name four instances in which to consider using hygrothermal modeling... Read more

At the start of 2021 there was one signatory to the contractors commitment (thanks Leopardo!).  Today, there are 12 companies participating, representing over $24 Billion in total revenue.

We don’t always give ourselves enough credit or take enough time to savor our accomplishments because there is always more to do.  But, this is a big... Read more

Hi Green Friends - I hesitated to post on April Fools, but wanted to get the link out for folks to share with their netowrks    I'll be teaching a workshop at the Pacific Energy Center on May 11 on Electrification Retrofits of Exisitng Non-Residential Buildings.  I'll be bulidng on the great work our sub-committee led by Allison has been... Read more

Greetings, colleagues!

Here's an opportunity for this community from AIA COTE Advocacy: US Congressman Paul Tonko (D-NY), Ranking Member of the Environment Subcommittee of the House Committee on Energy and Commerce, is looking for input from national stakeholder groups to help develop new federal climate legislation. Congressman Tonko... Read more

Hello - I have met several of you virtually over the last couple years. My name is Megan Zack and I am excited to share that I have changed positions and will be the Cheif Sustainabilty Officer at Wight & Company. After spending the last 20 years working as an architect with a small percentage of my time dedicated to sustainabilty, I'll be... Read more

Hello Green Gurus! We are diving deep into our carbon metrics this year and are finalizing some of our emissions factors for our Scope 1 and 2 emissions and in a few more months Scope 3. I'm hoping this brain trust has some recent knowledge to share on this topic. What we've found is there's a fairly big variance in what we've seen in published... Read more

Hi - I'm wondering if you have recommendations for a web/mobile app for occupants to self-assess comfort at regular intervals. I've downloaded comfy, but it wants to actually DO something about thermal discomfort by alerting discomfort and connecting, I believe, to the BMS. We just want to collect information at this point. And since I'm a... Read more

Hey team,

I'll go look to see who's in the MEP group, but does anyone in this circle have a northern California design engineer for institutional work that they'd particularly recommend? A group of folks we're engaged with is apparently having difficulty identifying a California-based MEP that everyone universally likes for high-... Read more