Championing the
Changemakers

Welcome to the quiz portion of Rethinking the All-Glass Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe eight reasons all-glass buildings are so popular in architecture today.
2. List the four elements Arup examined in their modeling of the effect of... Read more

Hello SDL Network,

I am working with members of the Seattle AIA COTE in planning an event that we are tentatively calling "Pathways to Decarbonization" or maybe "Decarbonization Success Stories".  The idea is for the COTE to identify entitities (school districts, local governments, higher-ed institutions, corporations, etc.) that have... Read more

Hello,

Are you aware of any bldg codes that have included requirements related to Material Health?

Thanks!

Mona Lemoine Architect AIBC, MRAIC, LEED AP BD+C, LFA, Regenerative Practitioner, RELi AP

Associate, Senior Sustainability Consultant

Mobile: 236-878-1752
mona.lemoine@stantec.com

Stantec... Read more

I'm teaching a LEED GA study group and was rambling on the differences between CIR and precident-setting LEED Interpretation (that gets posted in the addenda library and all). Then I went onto LEED Online and was showing how those are submitted... but can't actually figure out how a LEED Interpretation would be submitted. Has anyone done this... Read more

CEUs are available for reading our entire plumbing guide. Click here to learn more and take the quiz.

Constructed wetlands and other natural filtration systems close the nutrient and water loop, permitting safe and sustainable wastewater treatment and reuse right on the site.

We look for... Read more

Sometimes referred to as “the dark side”, the construction industry isn’t actually so bad.  We are mostly good people.  And, we need good people. 

Consigli is hiring a Sustainability Manager to work in Massachusetts, and we could use your help to fill the role.  If you or someone you know is brimming with the sustainability force, please... Read more

CEUs are available for reading our entire plumbing guide. Click here to learn more and take the quiz.

Rainwater capture is increasingly important as shortages put pressure on our water systems.

BuildingGreen-Approved Rainwater Harvesting

We approve a wide range of rainwater catchment and storage systems and components, with... Read more

Hi all,

We recently learned that Mass Dept of Environmental Protection (MassDEP) along with a few other state agencies are looking to offer grants for wastewater heat recovery implemented into projects. This is a newer technology that puts a heat exchanger or heat pump in the wastewater system that then extracts the heat energy and... Read more

Hi all -- 

We have a national restaurant client who is looking to source furniture (both indoor and outdoor) made with a minimum of 40% salvaged/recycled material, and they're very interested in finding a vendor that's woman- and/or minority-owned or that would qualify as a "disadvantaged organization" (their terminology).  They would... Read more

This report is no longer being sold.

If you have questions, please contact customersupport@buildinggreen.com

Whether you're selecting windows for a 99-unit condo project or for a single-family home, you're making a choice your client will have to live with for years, maybe decades.

And no matter how large or small... Read more

If only a few of the Best Practices will have checklists, which will be included under the "Implementation Toolkit" tab, I'm thinking we can simplify them (compared with LEEDuser).

I've attached a screenshot of a LEEDuser checklist. But I don't think BITuser will need the four types of icons, and the legend will take up more space than... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Hi All,

Has anyone dug into ASHRAE 2016 as part of the new v4.1 requirements or as codes start to adopt it? I recently presented on this and thought I should check my math to make sure I'm understanding and communicating this correctly.

My understanding is that there is a new reference baseline, that is essentially the ASHRAE 2004... Read more

Has anyone completed an LCA for an engineering structures lab, particularly one that has a strong wall and strong floor? 

Here's the Core Purpose for this group that came out of the Inaugural Summit.

We're off and running!

It is with the greatest pleasure that I announce to this esteemed group the recognition of our very own and much-loved leader Nadav Malin as an Honorary AIA member. AIA COTE had the honor to serve as Nadav's sponsor and we are pleased and delighted with this outcome (but not surprised of course.) For the record, "The AIA recognizes the notable... Read more