Championing the
Changemakers

test

Hi! I'm writing a short news piece on WELL v2 and looking for someone very familiar with the existing and v2 standards to interview about the changes. If you meet that description and would like to go on the record with your thoughts, please reply to me directly at paula@buildinggreen.com. Thanks!

It was great to see everyone who was able to join in the peer networks webinar and to be able to share a brief update on what the Defining and Measuring Resilient Outcomes working group has accomplished over the last year... and what we are looking forward to tackling in the coming year. 

I've both attached a copy of the deck here and... Read more

Are FSC glulams available? By many manufacturers? Which ones?

Stone was one of humanity’s first building materials and continues to play an important role in today’s green building industry. There are many stones used in the building industry, but the most common ones used for exterior cladding are limestone, granite, marble, slate, and sandstone.

BuildingGreen-Approved Stone and Masonry Cladding... Read more

Hello All,

A group of us (three architects and a builder- sounds like there should be a joke here) were debating this and we  are stumped.

Application: Residential exterior trim.

50 year warrantied composite product of agricultural byproduct with PVC (EPD not published yet) vs 100 year (if primed on all sides and painted or... Read more

Hey there hive mind,

Anyone have any CxAs in the Bay Area that they'd particularly recommend? I have a project in need.

Aley

Go to your profile, where you will find the TEAM MANAGEMENT section in the left side bar. Click on Team Members.

You can invite up to 9 more colleagues for a 10-person team to start their Premium Subscriber access through the Team.... Read more

Hi All,

The National Architectural Accrediting Board is currently undergoing review and revision of its “Conditions for Accreditation and Procedures for Accreditation.”

I recently attended the 2019 Reynolds Symposium: Education by Design, hosted by the University of Oregon in Portland. At the Symposium, a group of 100... Read more

Hi gang,

Following up on the recent Air Quality Design Jam at the summit, I’d like to round up the folks interested in supporting an Air Quality Working Group.

Didn’t attend the summit? No worries – everyone is welcome! We had a good group the other week and several of us want to continue the conversation.

The design jam... Read more

Hi all!

A couple years ago now there was an incredible thread here about circadian lighting design and WELL. There was a lot of dipping toes in the water with intent to gather lessons learned and report back.

What have been the high points and low points of circadian lighting design so far? What seems cost-effective and worth... Read more

For those of you working in jurisdictions with both prescriptive and performance-based commercial energy code pathways, roughly what percentage of your projects are using the performance pathway? How do your project teams decide which pathway to follow?

In Minnesota we are seeing very few projects pursuing the performance pathway,... Read more

I'm looking to draft some one-page briefs for my consulting engineers to outline what we would like to see in their specs regarding certain materials and systems. For example, letting the plumbing and civil engineers know that we prefer to eliminate PVC pipe and want them to specify alternatives like Polypropylene, cast iron, ABS, etc. The idea... Read more

Hi everyone,

Thanks so much again to everyone who attended the Spring 2024 SCL Summit. The report is now available and is a public document that can be shared.

Please feel free to email me with any questions. Enjoy!