Championing the
Changemakers

Pipe that delivers domestic water in North America is typically made from copper, chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX), all of which present environmental challenges. Bimodal polyethylene  (PE-RT) and polypropylene (PP) are potential alternatives with lower climate and health impacts.
... Read more

All,

The current version of the program manual includes ID numbers for the best practices, as shown below. I know we want to keep a quick reference number or ID, but though it would be worth asking if we want to use the below, reorder them in some way, or use a different kind of ID. Opinions?

Thanks,
Jenny

--------... Read more

On our Contractor Coffee talk a few weeks ago, Emi LaFountain (Turner Construction) brought up the idea that there was a lot of blue stain wood that are being landfilled instead of used, and suggested that maybe the designers among us could find a way to turn ugly into beautiful.

I had never heard of this issue, but I was on a call the... Read more

All,

I'm looking for a quick methodology to estimate GHG emissions from refrigerants on a per SF basis. Are there any benchmark studies or quick calculators similar to the embodied carbon study? https://carbonleadershipforum.org/embodied-carbon-benchmark-study-1/

Thanks,

Josh

Has anyone worked on a project installing a PowerNest system?  I just found out about it today and would love to get working information on it.  

Here's the link, in case its new to you as well. https://www.ibispower.eu/home

Thank you -

Hi folks -

I was contacted last week by the producer of the documentary that launches this Thursday, 12/10 - he is hoping to generate interest among folks across the environmental spectrum (which of course includes all of us!) so I am sharing his pitch below with you all. The subject of water scarcity and drought is only going to... Read more

Hi SCL,

It's my first time posting in the SCL group, as a somewhat new member. I'm grateful for any input you can provide to me!

My company, Nibbi Brothers, is currently brainstorming how to roll out an EV incentive program to employees. We recently polled our staff to get a general idea of where they stood with EV in terms of... Read more

Hi all, 

Following the SCL Summit back in November, the Waste Subgroup agreed to complete a Model Waste Management Plan to serve as a contractor commitment to reduce construction waste. I distributed the attached (very rough) draft back in Jan., and received some good feedback via forum comments. 

We would like to set up a call to... Read more

Hi all! During our Contractor’s Commitment call last week Amanda made a great point about sharing of waste data to gain some realistic, current metrics. Just like I assume many of you, we have both seen a decline in successful diversion these last few years and our companies’ overall percentages have taken a hit. In an effort to gain a full... Read more

At the summit we discussed sharing which consultants our firms have used for anti-bias training and EDI education. My office will participate in the upcoming AIA Seattle pilot Intercultural Leadership Program, but that only includes two of our firm leaders. If anyone can refer a consultant in the Seattle region for all-office trainings, I'd... Read more

Welcome to the quiz portion of Are Cool Roofs Green? The Answer's Not Black and White

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain why roofing choices are complicated by heating tradeoffs, climate effects, and condensation and how cool roofs are intended to reduce... Read more

I've been seeing Armstrong's DC flexzone ceiling system at Greenbuild for many years. I'm working on a net zero project with LED lights and solar panels. In theory, the transmission losses in going from DC power from panels to AC for the building to DC for the lights would be eliminated. But does anyone actually have experience using this... Read more

Hi SDL: Check out this great interview with Paul Hawken and  COTE members Gunnar Hubbard and Kira Gould. Lots of inspirational ideas about the importance of the built environment in carbon drawdown: 

Here's that link---

https://www.architectmagazine.com/technology/aia-cote-in-conversation-with-paul-hawken_o

thanks.

... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Why high-performance assemblies? And why now? Today we demand better thermal performance from our building assemblies than ever. But higher performance... Read more

Sages - see below for what was posted in the SDL forum

seems this topic needs all of you - to guide, critique, move, question

nadav forgive the blend posting but I dont know who sees what, and the SAGES are the bomb on this kind of troublemaking

thoughts all?

PFAS is in everything and you – Please join

Hello... Read more