Championing the
Changemakers

Welcome to the quiz portion of Protect Your Spec: 14 Strategies. 

Learning Objectives
Upon completing this course, participants will be able to:


Identify ways to ensure continuity between the environmentally preferable materials in a project specification, and the less-than-ideal materials that end up used in the final... Read more

Hi Shane and Dennis,

What return address should we use for BIT User forum notification emails?  Ben suggests something like no-reply@bit-user.org but whatever you like is fine.

Once you decide, please let us know who controls the domain name (e.g. bit-user.org or bitbuilding.org).  Ben will send them instructions for editing the... Read more

Hello Green Gurus,

We have an exciting new addition to the Peer Networks Hub to share with you. The recordings of this summer’s 5 minute presentations are finally available! You can view the full list on the Resources Page in the Hub. Using the headings at the top, you can sort by presenter name, title, or the date or event at which the... Read more

Hi Everyone,

HKS is looking for an energy analyst & systems design engineer for our Dallas office. If you know anyone that might be interested and qualified for this position, please send them our way!

https://careers-hksinc.icims.com/jobs/2428/energy-analyst-%26-systems-design-engineer/job

Thanks,

Ellen... Read more

Hi all, 

Thank you to those of you who attended the Greenbuild Show & Tell! We had an incredible time and learned so much from the presenters -- thanks so much to each of you for sharing.

I am including the slides for some of the presentations below. Please be aware that we have permission from all of the following presenters... Read more

Hey All!

One of the initiatives from our first meeting in Chicago was to gather and develop resources related to plug and process loads in buildings which will help us all with: energy modeling, equipment sizing and power distribution.  We had our first call this morning and are rolling.  Aspirations are that this could turn into a... Read more

I'd love to hear thoughts from the design, consulting, and contracting firms in this group about ways to make our specs more inclusive, or at least less exclusive to minority and women owned contractors and subcontractors and others that have not had the benefit of what a recent "Equity in Specs" presenter termed the "Fathers / Brothers / In-... Read more

Has anyone here found an alternative to XPS for the void former?

A structural engineering contact was included in recent conversations about embodied carbon in insulation materials and brought to our attention that this is a common use for XPS that has nothing to do with its insulating properties. It is typically used where concrete is... Read more

We're looking to expand our design performance group - let Peter or me know if you have someone to recommend to us! Here's the description. 

Air movement keeps occupants comfortable when it's warm, so cooling setpoints can be higher, and natural ventilation is a viable option even at higher temps and humidity.

BuildingGreen-Approved Ceiling Fans

BuildingGreen approves Energy Star-certified ceiling fans with ECMs—motors using electronic commutators.

Energy and... Read more

Hi Green Gurus,

In this stressful time, I think it is important for us to continue to feel connected and supported.  Also, it is difficult to come to terms with the reality of what is happening.  So, I thought it would be helpful for us to share some information about the response of our respective firms to the Coronavirus.

The... Read more

Does anyone know of a good summary of state and local energy code adoption for new building and ordinances for existing buildings? I know of this energycodes.gov site, but it feels somewhat misleading when you dig into it. For example, in CO, it suggests there is no min code, but there is, and it doesn’t show the extent to which local govs are... Read more

Hi, all.

Has anyone used Unicel's Timber Curtain Wall System? It uses engineered glulam wood mullions on the inside with aluminum mullion caps / butt joints. Has anyone gotten close to using it, but couldn't get it procured for a particular reason? They note up to 72% more energy efficienct than a conventional aluminum curtain wall and... Read more

Has anyone had any success with achieving the LEED Building Envelope commissioning points with an alternative compliance path using the requirements of the PHIUS verifier? It seems like an unnecessary duplication to ask the client to pay for a BECx agent and a Passive House verifier. Or am I missing something? I can't find any LEED... Read more

Welcome to the quiz portion of Engineering a Wood Revolution

Learning Objectives
Upon completing this course, participants will be able to:


1. Compare engineered wood to steel and concrete; and describe how engineered wood offers better dimensional stability, less waste, and more consistent performance than... Read more

Hi all,

GBD turns 50 this year! I would like to share some examples with leadership of how we can make it more than just an event for clients... something that can give back, engage the public, focus on sustainability, etc. I remember that a Seattle firm had an awesome event that engaged a public plaza, etc. I had read something about it... Read more