Championing the
Changemakers

Hello Everyone!

Please see attached are the Flip Chart Notes from last week's 2018 SDL Summer Summit.

Enjoy~

RoseAnn

I have been asked to recommend folks to join the AIA’s Framework for Design Excellence.  The AIA Framework for Design Excellence is basically the top ten toolkit, that has been rebranded by the AIA and is forming the backbone of much of the policy that the AIA is currently setting.

From the AIA's website:

HI All,

Really hoping to get some insight from all you wonderful people on how the Sustainability teams are set-up in your construction companies. As mentioned in my introduction post, I am the first ever Sustainability Engineer hired by my company.....until now all the work was handled by project teams. Which worked for them in the... Read more

We recently received an email from two high school students in Indianapolis with some great questions about construction waste management. If you're interested in helping these budding SCLers with their research, let me know and I'll send you Gabriela's email address:

__________________________________________________________

... Read more

Though BuildingGreen has long supported the use of electric hand dryers as a more environmentally friendly hand drying option, the majority of evidence appears to support paper towels as a preferred method of controlling the spread of potential pathogens. 

And even the most efficient hand dryers contribute significant CO2 to the... Read more

Welcome to the quiz portion of The Hidden Science of High-Performance Building Assemblies.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define hygrothermal pressure and explain what it requires of water, air, and thermal barriers in high-performance assemblies.
2. Explain... Read more

I am forwarding this request from Kate Simonen from the Carbon Leadership Forum to support a grant application for this research. I don't know if the link will work in this format but if you have questions or want to sign you can contact me or Kate and I can send you the mail with the link my email is:  lstrain@siegelstrain.com     Thanks... Read more

Welcome to the quiz portion of Whole-Building LCA Tools for LEED v4 and v4.1.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Understand the basic goals of whole-building life-cycle assessment, including how it can improve environmental performance and contribute to credit achievement in... Read more

EDITED LINK

Hello, below is a link to our newly uploaded research report, Embodied Carbon in Commercial Furniture. This new research report introduces a case study and some new baselines for measuring the carbon footprint of commercial furniture, to add to a growing body of work on this topic among our peers:
Embodied Carbon in... Read more

Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

This webinar occurred Thursday, December 15.

Attendance confirmation closed Friday, December 30.

Whether it’s the flooding in Pakistan, the devastation caused by Hurricane Ian in Florida, or the record-breaking wildfire season in Europe, climate change is in the news daily. Just as there’s an urgent need to reduce... Read more

A couple questions for this group. I know we're having a Green Commons meeting on this next week. But can anyone comment on the following questions?

-Have you or your firm split the benefit of the 179D with a client? Is this typical?

-Is prevailing wage a requirement for all 179D benefit, or does it follow the same lines as... Read more

We had so much fun at our Contractor coffee talk that I reached out to our MEP friends to see if they would set up something similar.  And they have agreed to host a talk on Thursday December 2, at 1-2pm EST.  They will talk about decarbonizing buildings, on a schedule that keeps us under the 1.5° C limit and will also address strategies for... Read more

Fellow SCLers,

This is a small ball item, but I recently had a conversation with a safety glove manufacturer called Traffi. They make PPE, but in particular they have a line of gloves that they promote as carbon neutral. Their organization's operations are offset with retired RECs, but one line of their gloves, LXT, is offset by a... Read more

Hello all,

Does anybody know of a substitute for Ecotect's solar tool? I use it to very quickly test shade options and I love how I can easily test horizontal and vertical elements, tilting and rotating them. I can have a window with the façade on one side and the sun path with the shadow mask on the other side. It is easy to use and... Read more

Does anyone have a recommendation for software that helps organize and track product and material selections for projects? 

Thanks!

I thought some folks here might be interested in a webinar we have coming up this Thursday 12/6 on the topic of best practices for occupant comfort surveys. Although this webinar is part of our Roast launch series, it will be tool agnostic, with information that will be applicable to any occupant survey regardless of tools used. 

To... Read more

Hello Sustainable Design Leaders,

Mark your calendars for an exciting webinar next Wednesday, May 27th, at 2:30pm ET and REGISTER HERE!

Missing the Forest: How forest practices impact the carbon embodied in mass timber projects is a follow-up to last month’s conversation on embodied carbon and mass timber. The presenters will be... Read more

We are cautiously rekindling the age-old debate: how are we balancing modeling software for design /visualization and performance analysis during early phase of design.  

We are heavy SketchUp users for early design, and most of our staff have access to COVE tool for early performance analysis. Problem is, I’d rather use Revit to COVE... Read more