Championing the
Changemakers

Hey, all. Confirming the forum index on the front side of the pay wall will be searchable. Thanks.

Hi folks,

I’m excited to be welcoming Meredith Elbaum and Nellie Reid into this forum! Meredith and Nellie were the duo that originally conceived of the Sustainable Design Leaders network back in 2008, and led the effort (with BuildingGreen’s support) through it’s early years. 

They later left their SDL roles, so they haven’t been... Read more

Hi everyone - in doing a carbon footprint for our firm, does anyone know if buildings that we design as Architects considered scope 3 emissions, or are they beyond the boundary of emissions? LMN's buildings, despite best efforts, are cumulatively multiple orders of magnitude above our scope 1 and 2 emissions. We have never included these... Read more

Hi everyone,

Thanks so much to those of you who presented at this years AIA Show & Tell, and thanks again to ZGF for hosting! Here are the slides for some of the presentations. Please do not share the slides outside of the networks unless they are marked "PUBLIC." Hope you enjoy!

Fluid-applied roofing materials can be added to an existing roof to extend its life and provide reflective characteristics.

BuildingGreen-Approved Roofing

Products listed by BuildingGreen have VOC levels below 50 g/l and reflective surfaces to reduce heat gain.

Energy Star requires initial reflectance of 0.65 for low slopes... Read more

How interested are you in a Sustainable MEP Leaders Summit this summer? 

Please respond to this poll ASAP, as we need to gauge interest before we finalize any details.

When: Wed. July 26 at noon to Thurs. July 27 at 1:30. 
Where: At a conference facility near Boston
Cost: $1200, which includes lodging, meals, and... Read more

Under a high carbon scenario, most of North America will be 2 degrees C hotter by 2050. Meantime, we're designing buildings that will still be around in 2050, to codes that don't yet factor in chronic risks associated with climate change. I want to explain these risks to my colleagues; I'm hoping some of our green gurus can help answer the... Read more

Welcome to the quiz portion of Five Reasons to Be Optimistic About Solar Energy!

Learning Objectives
Upon completing this course, participants will be able to:


Describe three ways how PV decreases environmental impact while increasing sustainability and health measures for communities.

Discuss PV life-cycle... Read more

Here is a fundamental question regarding measuring operational carbon emissions that I'm sure many of you can clarify for me:  Let's say you are considering design options and you want to know the relative contribution of GWP of adding an additional inch of continuous insulation to the building envelope.  The GWP from embodied carbon will... Read more

https://www.bostonglobe.com/metro/2018/06/04/new-china-policies-spark-di...

New China policies spark disarray in region’s recycling industry
Buried in the mountains of refuse at Casella’s recycling plant in Charlestown are tons of material that should have gone straight to the landfill — from tires and pots to lobster buoys and... Read more

Pierce Quéry, Roving Reporter

Hello everyone - 

I'm writing today to let you all know that as of this month, I am retiring from SERA, and that I'm going to be beginning a new journey as a consultant/volunteer!

I'm going to continue dedicating my time to policy and advocacy work (focused on decarbonizing the built environment) but now I'll be doing it as a free... Read more

Hi All,

Has anyone successfully adopted a Revit to ClimateStudio workflow with their new export tool? Right now we are using cove.tool because it works reasonably well with iterative Revit modeling, but are itching to try a more accurate and nuanced alternative.

Thanks for any and all experiences!
Misha

Welcome to the quiz portion of Whole-Building Life Cycle Analysis: Promises and Pitfalls.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define whole-building life-cycle assessment.
2. Explain what whole-building life-cycle assessment can and can't do so you can work within... Read more

We have a client who is asking us to design a roughly 10 ksf Wellness Center for PHIUS 2021 certification.  The program includes several high density assembly type spaces - roughly 300 person peak occupant load for the building.  The Criteria Calculator that the architect showed us puts the building peak cooling load at 4 BTUH/sf (3000 sf/ton... Read more

The Water Sub-Group met today. This group is working on three items: 

1. Project Water Plan Template

2. Project Water Tracking Form Template

3. Research and Resources Document

The Meeting minutes are attached. The next meeting is 5/19/20 @ 2:30 PM CST, via webex and teleconference.  Please contact me if you would... Read more

Hello Green Gurus,

I am starting some research on municipal incentives offered to developers seeking to achieve sustainability targets and am wondering what you may have come across in your work, including but not limited to achieving Passive House. In my limited research, here are few I have come across to get us started:

Hi folks,

Our next private webinar is coming right up:

Fusion of Design + Performance: How Payette Was Recognized As AIA Firm of the Year

Tuesday, February 12, 1:00 pm EST

Payette is the first AIA Firm Award recipient to have been nominated jointly by the Committee on Design and Committee on the Environment. Z Smith... Read more