BuildingGreen Report

Product Guide

Conventional roofs contribute to heat loss, heat islands, and excessive stormwater runoff.

BuildingGreen-Approved Green Roofs

BuildingGreen approves systems with appropriate planting media that can be created from regional materials and may be blended for specific characteristics, such as:

nutrient retention structural... Read more

Forum topic

There is a ton of stuff being posted about this, so this is definitely an area where it's nice to have had someone going through it and selecting the best. Thanks for doing that, Jen!

- These tips from 350.org have a great focus on connecting people and using different techniques. Their sample retreat shows how some of it might look in... Read more

Peer Network Event

Forum topic

Hi all,

Looking from insights from anyone who's been through WELL certification before - we've got a lab/office project pursing WELL down in Florida that is struggling to meet the turbidity level requirements of the WELL W01 prerequisite, specifically with the hot water supply, and we're not sure how to best remediate the issue.  Should... Read more

Forum topic

Hi Everyone!

I am now in my last week in the Bay Area, and in my last three weeks at (my first 15 years at) SERA, as I will be leaving on my extended sabbatical at the end of April!

I will miss following this group's dialogue, and will especially miss attending the summits for the next couple of years! 

My colleagues Mark... Read more

Forum topic

If any of you did not get this via email directly from the AIA, here is the link to the AIA’s recent letter regarding HFCs…for firms to sign.

https://p2a.co/SlgBxFL

Looking for as many firms as possible to sign!

many thanks.

Mary Ann

Forum topic

Does anyone know of a source for finding the operational solid waste generated by typical building/use types (weight/sf)? I couldn't find anything on LEED, True, or EPA. I found this table but isn't by sq ft for many of hte uses. Waste Generated by Industry and Building Type (wastecare.com)

Forum topic

Hello!

I'm curious what other firms like to use to run site-specific sun path and wind path analysises that is relatively intuitive to use and generates good graphics. We have used the climate consultant software for wind roses which is free and simple. We've also used sefaira but we're hoping to crowd source more resources. We purchased... Read more

Forum topic

Nothing exciting like embodied carbon or EPDs... but I'm interested in some real talk on the actual performance of low-flow fixtures.  

We continue to encounter pushback on water-saving fixtures for concerns of ongoing performance. I'd love to have a dialog in this group because I find it hard to believe these challenges can't be... Read more

Forum topic

Hello everyone,

So sorry that some of you couldn't get onto the call on Tuesday! There was a bit of a problem with our Zoom links. I think we've figured it out, so we should be all set next time.

Here are the notes from the call. If you have any questions about something on there, please feel free to post them here and we'll try... Read more

Forum topic

Hello, 

Does anyone have experience with USGBC's Green Training Pilot Credit, and/or use of an innovation credit for subcontractor training? I was going to propose training to our subs on becoming an EnviroStars Businesses (WA Green Business Program) and also tie in the Sustainable Contractor's Commitment/project goals.

Since... Read more

Forum topic

Hello everyone,

Over the past couple of years the Climate Smart Wood Group has met monthly to discuss all things related to the use of timber in building design and construction.  From forestry practices, to supply chain and sourcing information, to design experiences and examples, the group has operated as an open forum for advancing... Read more

Quiz

Welcome to the quiz portion of Raze or Retrofit? Six Extraordinary Answers to an Everyday Question.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Understand how the embodied impacts of renovation compare to those for new construction.
2. Provide three reasons why building... Read more

Forum topic

Hi folks,

If you're registered for the Summit, you should have gotten this message from me separately, but I wanted to post it here too to be sure. It would be great if everyone coming from out of town could stay together! We've achieved critical mass in terms of Summit participants--this is going to be a great and impactful gathering!... Read more

Basic page

Our all-volunteer Advisory Board helps BuildingGreen identify the most critical topics for our coverage, and directs our research as we investigate these topics and bring them to our readers. Their distinguished and varied service in the field of environmentally responsible building is an inspiration.

Steve Baczek, R.A., Reading, MA Bob... Read more

Author

Angela has been an integral part of the BuildingGreen team for fifteen years, serving in a variety of roles.

Her diverse career path has led her from union organizing, to cabinet-making and exhibit production for the Boston Children’s Museum and the Museum of Fine Arts, Boston, to teaching woodworking at Massachusetts College of Art. She... Read more

Spotlight Report

Biophilic design features are not just aesthetically pleasing; researchers have found that patients heal faster, workers are more productive, and children learn better when more elements of nature are present.

And yet there are still very few projects developed today that inspire a connection to life and the natural world. Some people... Read more

Private Group