Championing the
Changemakers

All--

Metropolis magazine asked me to write a long piece about the current state of post-occupancy studies. I'm wrestling with whether to do it and how to approach it, but it would be helpful to hear your thoughts on the following--

--importance of the topic

--typical and atypical approaches and criteria

--examples... Read more

Apologize in advance if this has been posted before but we are trying to get manufacturers of stage curtains to give documentation that proves that the product does not have halogenated fire retardants. Manufacturers say they don't have them or concentrations are limited to 100ppm but they don't seem to have documentation to provide for it.... Read more

With the increasing need to support design with techncial expertise, I am curious to hear how others are meeting this challenge.  Do you build energy models in-house?  Do you have a team of experts whose sole responsibility is to support design teams with tasks such as energy modeling and LCA, or is that expertise distributed throughout the... Read more

With an urgent climate justice mission, AIA has the call open for volunteers to help shape our industry's action. COTE, the Codes + Standard Committee (one of the most important committees anywhere!), Board Committees (including the Committee on CLimate Action and Design Excellence - CCADE)  and the Strategic Council have openings. Consider how... Read more

Hi all,

We are about to start a affordable housing passive house project in Boston and in a few presentations I've seen great signs that builders use to try to get the point across to subs as to how important air sealing is. Some are even quite funny! The builder we are working with does not have a sign like this, but is open to ideas.... Read more

Has anyone worked with Vidaris for LEED certification and have a contact there? If you want to direct email me with feedback on the experience that would be helpful as well.

I'm exploring the use of phase change material for a project. Specifically, looking at the BioPCM/ENRG Blanket product. I see on their website that ZGF used it at University of Washington. I'd love to hear any feedback from folks who have used it, and more specifically how your energy model and MEP engineer accounted for it. Thanks!! https://... Read more

Is everyone else having trouble with a dysfunctionally slow LEED-Online today (i.e., worse than the usual incredibly slow performance)?

Just highlighting a tool from Circular Ecology (the group that brings you the Inventory of Carbon and Energy data) for measuring Scope 1 and 2

https://circularecology.com/organisational-carbon-footprint-tool.html

Hi Gang, 

We are looking to implement the contractor commitment and are running into COVID-19 protocol barriers when looking at the Jobsite Wellness category specific to the soap as well as the food storage/eating areas on site. Anyone else run into this issue? 

-Kena 

Hi All,

I just tried to post a minute ago but it said my connection was lost, so I'm starting over again. You may see two similar posts from me.

Alejandra and I started a document (attached) with ideas on how we can tackle some of the issues we are currently facing with zero waste, as a follow up to our conversation last Friday... Read more

Dear all,

A mechanical engineer on a healthcare project we are working on has asked for help in dividing the ventilation calculations between ASHRAE Standards 170 and 62.1; can anyone here help shed some light on it?

"This is the first time I am working on LEED for a hospital and I am not sure how the template wants me to show... Read more

Welcome to the quiz portion of Whole-Building Life-Cycle Assessment: Taking the Measure of a Green Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define key concepts of whole-building LCA.
2. Recognize the inherent flaws, and potential gains, of whole-building LCA... Read more

In an effort to share expert knowledge on the topic of whole building LCA, we are continuing our expert guest webinar series, addressing the topic of steel on March 19th at 1PM EDT. Michael Gryniuk PE, with LeMessurier and SE 2050, will be joining us to share his strategies for reducing the embodied carbon of steel. This webinar is particularly... Read more

Hi all,

We're doing some tool-related soul searching at WRNS and some folks here have raised Cove.Tool as a potentially interesting addition to our library. I'm looking for any insight you all can provide. Cove has come up various times, but curious if there's been any change for the better/worse in the past few years.

Do you use... Read more

Medium-density fiberboard (MDF), particleboard, and interior-grade plywood can emit formaldehyde, a known human carcinogen. Some materials  come from non-sustainable sources.

BuildingGreen-Approved Panels

Products meet California Air Resources Board (CARB) ultra-low emitting formaldehyde (ULEF) or no-added-... Read more