Championing the
Changemakers

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

For a number of years a colleague and I have been teaching a course about sustainability and water in architecture at the University of Pennsylvania's architectural school (PennDesign).  This year we're hoping to bring a few new opinions to the table for at the same time as we broaden the discussion.  Because the class will be virtual again... Read more

We are looking for someone early in their career to take over our green building certifications (mostly LEED).  They will also be helping our office build expertise in other certifications, keeping up with green building ordinances in our markets, and (hopefully) help me answer all those questions about energy codes. 

They do not need... Read more

Remember 2013? LEED version 4 had just been released to the public. Hardly anyone was using it, though—not only because they didn’t have to, but also because there just wasn’t a pathway to achieve many of the new credits in the rating systems. Especially the product-related credits in the Materials & Resources category, along with the Low-... Read more

Hello Sustainable Advising Leaders,

Here are the notes from the last Zoom call. We had a great turnout! Looking ahead, now that things are rolling along we’d like to get into the rhythm of a regularly scheduled monthly call. Since Tuesdays seem to work well for most people, I am proposing the 4th Tuesday of the month from 3-4pm ET. That... Read more

Hi folks,

Here's the next Peer Networks private webinar. As usual, it will be recorded and shared in the network if you can't make it in person:

Thursday, July 18, 2pm EDT (11am PDT)

The Center for Active Design (CfAD), operator of the Fitwel Certification System, recently launched Fitwel v2.1, which advances a vision where... Read more

Dear all,

On a major renovation where the wall R-value/U-value needs to be brought up to energy code, specifically a mass wall situation, does anyone have insights on how the situation is best dealt with? On the project in question for me, the continuous insulation might have to be added to the inside surface of the mass wall and there... Read more

Thank you for subscribing!

You’re about to start getting free updates on key news and intelligence you need to succeed and do your best work in the green building industry. We’ll also share special opportunities to get our premium content.

Continue to BuildingGreen »

Continue to LEEDuser »

Welcome to the quiz portion of The BuildingGreen Guide to Insulation!

Learning Objectives
Upon completing this course, participants will be able to:


Plastic windows come in both ABS and vinyl (PVC). Even though PVC is particularly loathed by environmentalists, energy performance is BuildingGreen's primary green consideration for windows, and some vinyl windows offer exceptionally strong energy performance, often with competitive pricing.

BuildingGreen-Approved Plastic Windows

... Read more

Beginning this year, Miller Hull will not only continue to quantify the upfront embodied carbon of every project we finish through construction, but now purchase third-party certified carbon offsets equivalent to one-third of the project’s impact. Great design is no longer enough - we must take responsibility for our architectural impact in the... Read more

Auto-quiz used for CEUs for attendees of the 2023 SDL Winter Summit.

For those that missed Z's subtle mention of this a few weeks ago, Bora finally decided sustainability is important enough to have someone dedicated full-time to it, and then went out and got one of the best:

https://bora.co/bora-hires-sustainability-director-corey-squire/?tax=all-posts

I've been sharing Corey's thoughts on... Read more

HI All,

I am curious if others are using THERM in-house for your envelope design?

We usually use our building envelope/curtain wall consultants (Boston - so mostly RWDI and Heintjes) but our teams are finding that they need the information faster than our consultants can provide, they are backlogged, or we have some curtain wall... Read more

HI All,

Really hoping to get some insight from all you wonderful people on how the Sustainability teams are set-up in your construction companies. As mentioned in my introduction post, I am the first ever Sustainability Engineer hired by my company.....until now all the work was handled by project teams. Which worked for them in the... Read more

Hi Sages,

We had a great conversation in yesterday's Sages meeting. We took the long list of ideas that we brainstormed last month and in our March poll when thinking about what we could/should focus on as a group and we did some refining and prioritizing using dot-voting in Miro (once we got the voting technology figured out!). Notes... Read more