Championing the
Changemakers

Hi SDL!

Our CM recently offered up the possibility of substituting Pozzotive into our structural and paving concrete mix (www.pozzotive.com) on a large public building. Apparently it is on a level with the cost of standard cement.
We are eager to reduce the project's embodied carbon, and this seems almost too good to be true.

... Read more

Morning SDL,

Working on a midwest lab and trying to make the case for electrification in a slower greening grid with a reluctant MEP team. Here are a few sources I have checked for case studies:

NBI Getting to Zero Database, doesn't have a Lab Category but does have cold weather examples Labs 21, has low EUI and good data but no... Read more

Hello Sustainability Leaders,

Great to see some of you at Greenbuild last week.  Thanks to all who responded to Nadav’s post-election blues post.  Lots of helpful insights and sentiments that left me very grateful to be part of this community.  On a related note, since the election I’ve been asked by people in our office and in life if... Read more

Welcome to the quiz portion of Making Your Own Electricity: Onsite Photovoltaic Systems.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Explain the difference between crystalline and thin-film photovoltaic technologies, and the uses of each.
2. Describe the ways in which PV... Read more

Hi all!

I'm working on my first energy positive / passive house multifamily building and trying to figure out the trash/recycling chute. I am curious what solutions you have employed to make the trash chute air tight? We have excluded the whole chute from the envelope. Do you use airtight doors (and which ones?) at each floor trash/... Read more

I was recently asked if there is a way to quantify financially what one MT eCO2 might be worth in the context of a building owner reducing their own carbon emissions.  How do you put a dollar value on those reductions?  Does anyone have experience with that or can you point me to the correct resource to answer this question?

Typically made from petrochemicals, carpet and its adhesives can offgas. It is also a challenge to recycle them, increasing the chances that it will be incinerated or disposed of in a landfill. Because carpet has a limited lifespan, its life-cycle performance is key.

BuildingGreen recommends modular carpet that demonstrates lower life-... Read more

Exterior shade or screening devices are generally much more effective at reducing solar heat gain than their interior counterparts.

BuildingGreen-Approved Shading

BuildingGreen approves exterior window and glazing attachments that reduce solar heat gain and glare or redirect daylight, providing important energy benefits while... Read more

At the request of the SCL group, here's the SCL Salary Survey! 

There is a link at the end of the SurveyMonkey Survey to a Google form where you will be able to register that you completed the survey—that way we’ll know who participated without having any identifying info in the actual survey. Results will be shared with those who... Read more

Team,

You probably know on July 9th, WHO issued a document and agreed aerosol route of COVID-19 transmission is possible, but fell short of saying we need to make provisions in our buildings for it per the "Do no harm" principle.  Mary Ann Lazarus, Pauline Souza, Kay Sargent, Joyce Lee, and I (SDL members from architecture and... Read more

Sustainability leadership has requested that you take this quiz to help assess sustainability literacy across the firm. Your own results will be presented to you at the end of the quiz but will not be shared with anyone else. Only aggregated, anonymized results will be available to others.

Please don’t do research to inform your answers... Read more

I just saw this post from Conor on LinkedIn.

Starting in January 2019, all new Columbia Construction Company projects require LED temp lighting.

Are others doing this too? Frankly, given all the benefits and how quickly the industry is matured, it's hard for me to understand why anyone would use anything other than LEDs on a job.... Read more

I'm looking to change consultants. Let me know if you have worked with a 179D consultant that you would recommend.

Hello Green Gurus!

Here are the details for the next Peer Networks Webinar (happening next week!): Don't forget to REGISTER HERE!

Define and Contract for Building Performance Simulation Services Using ASHRAE Standard 209
Thursday, February 13, 3pm EST (12pm PST)

ASHRAE Standard 209-2018 “Energy Simulation Aided Design... Read more

Hi GGs,

We are looking to do a renovation of a very leaky old office space, and we want to get a good snapshot of air quality and effective envelope R values both before and after.

Does anyone have experience with:

1. installing heat flux sensors on windows and walls

2. deploying IAQ measurement devices that can log... Read more

Welcome to the quiz portion of Rebuilding for Resilience in the Face of Natural Disasters!

IMPORTANT: This quiz covers three related articles within this topic. 

Learning Objectives
Upon completing this course, participants will be able to:


Explain the importance of resilient design at hospitals for ensuring life... Read more

Has anyone pursued the schools Mold Prevention IEQc10 successfully and have format for the documentation created they would be comfortable sharing? Our contractor is excited about pursuing this credit but no on our team has pursued it before.

thanks in advance!

Hi all - at the suggestion of Nadav and some of the Sustainable MEP Leaders, I'm reposting a thread I started a couple days ago in the SMEP forum.

In response to increasingly aggressive (and effective) targeting of building owners (particularly schools), a group of researchers have put their support behind a letter warning against the... Read more