Championing the
Changemakers

We have an environmentally-minded client who asked us to look into an alternative to the blue adhesive film that is typically used to seal uninstalled ducts for IAQ purposes. From a human health and waste perspective, they were hoping to find something that was both plastic-free and reusable. Has anyone tried out other options? I thought it was... Read more

...for all the folks on the west coast.

It’s smokey out there. For anyone looking for a cheap and relatively effective way to clean your indoor air, here is an article on a DIY box fan filters. 

https://www.texairfilters.com/a-variation-on-the-box-fan-with-merv-13-filter-air-cleaner/

This PSA is from our friends at NEEA (... Read more

Since starting at LPA last fall, the number one question I get from people outside the firm is how we are hitting (2018-2019) or getting so close to hitting the 2030 Commitment goals. 

Here is a chance to see for yourself! LPA is seeking a Sustainable Design Specialist to join our RED team (Research Education Design) - location open to... Read more

Hello, 

I am struggling with understanding if I should be using Annual Marginal Emission Factors (MEF) or Annual Average Emission Factors (AEF) for evaluating different building design decisions.

Everything I know is from this document. So as I understand it ... an individual building or retrofit is going to change the marginal... Read more

A couple questions for this group. I know we're having a Green Commons meeting on this next week. But can anyone comment on the following questions?

-Have you or your firm split the benefit of the 179D with a client? Is this typical?

-Is prevailing wage a requirement for all 179D benefit, or does it follow the same lines as... Read more

Currently, the BIT User site is fully accessible without having to log in (unless you want to edit or add content, of course). The time has come, however, to start restricting access only to logged-in users.

Which sections will be freely visible, and which will be visible only to registered users? Here's what I recall from our earlier... Read more

Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

A site license allows your entire organization to access and share the report, and to keep a copy in your library. The site license does not allow multiple users to earn CEUs. If multiple individuals in your organization would like to earn CEUs from this report, please purchase individual copies.

The BuildingGreen Guide to Thermal... Read more

Alerting building occupants about indoor air pollutants is important in many situations.

BuildingGreen-Approved IAQ Equipment

Products approved by BuildingGreen range from single-use test kits to monitoring systems installed throughout a building. Some test for gases such as radon, VOCs, or carbon monoxide, and some for mold and... Read more

Hello everyone,

Here's a reminder that our call for this month will be taking place next Tuesday, November 12th at 2:00pm EST.

Please feel free to join us!

Join Zoom Meeting:

https://zoom.us/j/248664490

One tap mobile
+16699006833,,248664490# US (San Jose)
+19292056099,,248664490# US (New York)... Read more

Hi folks,

In case you know someone who might be right for this Seattle-area gig:

The position is a Senior Program Manager with CBRE on the Microsoft account working with Katie Ross, MS Sustainability Program Manager, to deliver their sustainability program to their real estate globally. 

Here is the posting: https://cbre.... Read more

Does anyone have a recommendation for software that helps organize and track product and material selections for projects? 

Thanks!

Welcome to the quiz portion of The Hidden Science of High-Performance Building Assemblies.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define hygrothermal pressure and explain what it requires of water, air, and thermal barriers in high-performance assemblies.
2. Explain... Read more

Dear All,

I'm happy to announce the Call for Speakers for our next Gulf Coast Green conference, which will take place June 1, 2018 at Rice University in Houston.  The theme is Resilience: Beyond Recovery.  (Harvey, you know).  We absolutely love to have SDL members at Gulf Coast Green, and I know there are several of you who specialize... Read more

Fellow SCLers,

This is a small ball item, but I recently had a conversation with a safety glove manufacturer called Traffi. They make PPE, but in particular they have a line of gloves that they promote as carbon neutral. Their organization's operations are offset with retired RECs, but one line of their gloves, LXT, is offset by a... Read more

Angela has been an integral part of the BuildingGreen team for fifteen years, serving in a variety of roles.

Her diverse career path has led her from union organizing, to cabinet-making and exhibit production for the Boston Children’s Museum and the Museum of Fine Arts, Boston, to teaching woodworking at Massachusetts College of Art. She... Read more

Dear all,

A mechanical engineer on a healthcare project we are working on has asked for help in dividing the ventilation calculations between ASHRAE Standards 170 and 62.1; can anyone here help shed some light on it?

"This is the first time I am working on LEED for a hospital and I am not sure how the template wants me to show... Read more

Has anyone worked with Vidaris for LEED certification and have a contact there? If you want to direct email me with feedback on the experience that would be helpful as well.