Championing the
Changemakers

For my first test post I'm going to be completely boring and ask about logistics.

If we know of someone that should be part of this forum, how do we invite them? There were a couple of people that I thought were on the Wiggio who I recently found out were not. There may also be folks from our regional groups who may not have been part... Read more

Have you been perusing the recently launched Contractor's Commitment and thought to yourself, 'Companies are going to need more guidance/templates/resources if they're actually going to implement this thing'? Good--now's your chance to help develop those resources.

The Contractor's Commitment Working Group is meeting December 1, 1pm ET.... Read more

I'm curious if anyone can share their strategy on indoor air quality for the return to office. Is this something that is prioritized at your firm from a wellbeing standpoint and with the current health crisis at hand? Lendlease is looking into options to safeguard our employees/occupants as we move back into the workplace and I'm researching... Read more

Curious on stories when IAQ testing for LEED or WELL didn't come back with "all clear, everything's good" results we all hope for. 

I have a project right now where we are tracking down suspicious sources and look forward to telling the full story when it's done being written. 

Thought maybe this would be a good safe space to talk... Read more

Welcome to the quiz portion of What’s New in Multi-Attribute Environmental Certifications.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe several styles of multi-attribute certification.
2. List a benefit and a downside to both point-based certification programs and... Read more

Hi All,

I'm working on a LEED for Schools project under 2009, and received some amorphous comments back about our Mold Prevention Plan. We used the LEEDuser template as a guide, while also referencing the EPA document the credit is based around, but the reviewers feel we haven't provided proper metrics. The EPA plan is something like... Read more

All--

A few months ago, I sent around a note about an article I was writing about the state of post-occupancy studies. It finally came out, in the latest issue of Metropolis. Great quotes and work from Payette, EDR, KieranTimberlake, HKS, and others. Thanks to all for helping with this.

I don't believe it's available online yet,... Read more

Welcome to the quiz portion of Driving to Green Buildings: The Transportation Energy Intensity of Buildings​​!

Learning Objectives
Upon completing this course, participants will be able to:


Define “transportation energy intensity” as it relates to buildings and understand its impacts on the environment, human health, and... Read more

Hey Everyone!

We are delighted to share a major milestone in our commitment to sustainable design. After two+ years of intensive research, refining, and internal application, NBBJ is thrilled to announce the external launch of ZeroGuide, an innovative tool for early-phase carbon estimation, now available to the entire AEC community!... Read more

Hi All - 

Has anyone explored hydronic system analysis software (1D CFD)? 

Some options are PipeFlo, AFT Fathom, PipeFlow (eerily similar name to first option), COMSOL Pipe Flow Module. 

Applications could range from general system troubleshooting, pump sizing, to district hydronic system network analysis. 

Best,... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Live webinar approved for 1 AIA LU and 1 GBCI CE hour. Each person intending to earn CEU credits must purchase their own seat.

Why high-performance assemblies? And why now? Today we demand better thermal performance from our building assemblies than... Read more

(posting here for Kira)

Sustainable Design Leaders:

Is your firm using the AIA COTE Top Ten Toolkit in some fashion? COTE would like to hear from you, especially if you are willing to share your story. 

Specifically, we'd like to share best practices and lessons about how it is working (with certain types of projects, at... Read more

Hi all, 

I'm looking for critical mass here. Do any of you have or know of clients who are requiring Just labeling for their consultants? I've heard that Google is asking this, and wondering who else might be on that course. Thanks! 

I am getting started on a research project to evaluate the feasibility, costs, and benefits of using phase change material (PCM) to passively regulate temperature in Minnesota buildings. If anyone has experience designing with PCM, installing PCM, or occupying buildings with PCM, can you share any lessons learned that would be relevant as... Read more

Preservative treatments extend the service life of wood, but many such treatments are highly toxic, especially to aquatic life.

BuildingGreen-Approved Preserved Wood

Products approved by BuildingGreen use chemicals (commonly borates) that are relatively low in toxicity and have low VOC emissions.

Health and Environmental... Read more

Hi everyone, 

We’re happy to officially announce some big news you might have heard about on our monthly calls: as we wrap up 2024, we will be transitioning to a new platform for our Peer Networks Hub! 

Instead of finding the forums, member directory, and all other Peer Network resources on BuildingGreen.com, you will be able to... Read more