Championing the
Changemakers

Hi SDL!

Our CM recently offered up the possibility of substituting Pozzotive into our structural and paving concrete mix (www.pozzotive.com) on a large public building. Apparently it is on a level with the cost of standard cement.
We are eager to reduce the project's embodied carbon, and this seems almost too good to be true.

Hi everyone, 

Following November's SCL Summit, I put together a model Construction Waste Management Action Plan based on the ideas shared in our focus group. It is linked below in Google docs, so everyone should have access to live edit the plan. Please take a look and add comments if you can. It's a very rough outline, so we can... Read more

Hey Sages, Just lobbing this over the transome - not sure if anyone else cares :) but this would be a great group to dig in if anyone IS interested.

 For the past few years, I've been working on melding two completely separate worlds - our world (with typical project delivery) and the world of Agile (not just software development process... Read more

SDL Show & Tell in Chicago, Tuesday, November 13 from 7-9:30 PM (CST)
HKS | 125 S Clark Street | Chicago, IL 60603

What better way to kick off your time at Greenbuild than with snap previews of the best sessions? The Sustainable Design Leaders Show & Tell is back, brought to you by BuildingGreen and HKS! This event is by... Read more

The Sages network is specifically for industry veterans and long-time Peer Network members, including those who are still active with one of the other networks and those who have moved on from that role. This group can help set priorities, drive advocacy, and... Read more

Hi everyone, it was so great to meet some of you at the winter summit and finally connect names with faces!

We have a project that is targeting CalGreen Tier 2 and LEEDv4 Platinum.  Thought I'd reach out to see if anyone on this forum has found comparison guides between the two?  Looking for something similar to this CalGreen 2013 tier... Read more

I was recently asked if there is a way to quantify financially what one MT eCO2 might be worth in the context of a building owner reducing their own carbon emissions.  How do you put a dollar value on those reductions?  Does anyone have experience with that or can you point me to the correct resource to answer this question?

Morning SDL,

Working on a midwest lab and trying to make the case for electrification in a slower greening grid with a reluctant MEP team. Here are a few sources I have checked for case studies:

Hi All- I will be starting bi-weekly mtg for the PFAS working group to align on our goals as consicous firms and finalize our message aka 'letter to manufacturers' for reducing PFAS in building materials. Please email me (pgupta-garg@wrnsstudio.com) to let me know if you are interested in being a part of the group. First mtg will be next week... Read more

I'm pleased to announce that the AIA Board of Directors has unanimously adopted the A&D Materials Pledge as the AIA Materials Pledge!!!!! The support of so many of you was a key factor in making it so easy for the AIA Board to adopt The Pledge. The Materials Pledge now has 90 signatory firms, including many of yours. Thank you all.  Now,... Read more

Welcome to the quiz portion of The Urgency of Embodied Carbon and What You Can Do About It​​!

Learning Objectives
Upon completing this course, participants will be able to:


Define “embodied carbon” and explain why embodied carbon is a significant source of greenhouse gas emissions, which threaten health and safety... Read more

Hi All,

I'm teaching a class this semester at CU Boulder on Zero Carbon Buildings and Cities (a new class that I'm making up as I go). The hardest part, I'm finding, is locating some good materials that cover the basics of energy efficiency for non-building engineers or designers (we are energy and sustainability generalists in this... Read more

I am working on a new community development in St. Paul that is striving to achieve net-zero energy. We are able to get there mathematically by using the extra generation on light industrial rooftops to offset medium-density housing energy use (all buildings are anticipated to have different, private owners). However, this puts us over... Read more

I'm putting together information on natural gas bans (or put another way, all electric buildings) for an advocacy effort and looking for some experts. Anyone have thoughts on banning natural gas and other fossil fuels on residential projects? Specifically what are the considerations/challenges/opportunities at each scale (single family, low... Read more

Greetings to the Green Commons!

Those of you who attended Greenbuild may remember that during one of the keynotes, Ali Zaidi - White House National Climate Advisor, announced that the White House was developing a definition for "Zero Emissions Buildings" (here’s a [LINK] to a related Washington Post article). The draft language for the... Read more

Hi all,

Here's a good follow up to Maria's steel question on Monday.  We have a Midwest project that unfortunately (from a carbon perspective) is required to use a traditional, thick precast facade.  We’re working with the contractor and potential future (not yet bid out) fabricators to determine an appropriate % of pozzolanic material... Read more