Championing the
Changemakers

Curious what people's 'best' experiences or recommendations are for load calculations and energy modeling regarding electrochromic glazing... hoping I can lean on others as it's just now becoming more of a talking point in our market here in Omaha. 

Specific questions including whether load and energy modeling software are separate (... Read more

Hi all,

I am working on a Div 01 sustainability spec section for our firm to include by default on all projects. I've been finding a lot of great sample language out there for embodied carbon measures and material transparency (huge thanks to anyone here who had a part in developing those resources). 

One thing I'd like to include... Read more

Hi Green Gurus!

We’ve gotten GREAT feedback and input from many of you via the survey about our planned fall events. You expressed a lot of interest in all the events we proposed: a series of in-depth Integrative Design Jams, separate Summits for SDL and SCL, and regional all-network workshops, starting with one in Boston—so we’re moving... Read more

Hello All-

  We have a K-12 school project that is using a R-60 flat roof assembly as an energy & costing benchmark (along with other energy efficiency measures but this is the relevant detail to our question).  The project mechanical engineer is not onboard with a number of our energy conservation measures and has been sharing... Read more

The headlines are everywhere—from heat waves in Europe to wildfires in the Western U.S. to tropical cyclone flooding in Australia. In this age of climate change, just as there’s an urgent need to reduce carbon emissions and other greenhouse gasses, we also need to adapt and invest in resilience.

Increasingly, owners are asking for risk... Read more

Hi All, 

As I mentioned at the summit, I'd like to start a discussion thread on knowledge management, company Intranets, and limiting Information overload as it pertains to sustainability. Those who are interested can share thoughts and experiences via this thread and maybe we'll set up an occasional phone call.  

Here are the... Read more

Greetings to the Green Commons!

Those of you who attended Greenbuild may remember that during one of the keynotes, Ali Zaidi - White House National Climate Advisor, announced that the White House was developing a definition for "Zero Emissions Buildings" (here’s a [LINK] to a related Washington Post article). The draft language for the... Read more

Commonly used for interior partitioning of commercial buildings, light-gauge steel framing is increasingly being used in residential construction. Compared to solid wood, steel studs are lightweight, dimensionally stable, resistant to insect damage, and of consistent quality. 

BuildingGreen-Approved Structural Steel

Products... Read more

Welcome to this practice session for the LEED AP v4 exam, and good luck!

All the exam questions and explanations that follow were authored by Alex Spilger, LEED AP BD+C of GreenStep Education, and are provided in this BuildingGreen "exam simulator" through a special partnership with GreenStep and with our friends at the Poplar Network.... Read more

I am looking for example specifications for low carbon concrete to have our structural engineer(s) review and incorporate.  Does anyone have good examples or  link(s) to good examples?

Thanks,

Mark

Lisa Richmond

If yes, take a look at Tour:  TM10: Transit Oriented Development: Chicago Style

https://explore.greenbuildexpo.com/Attendee/Schedule/SessionDetails/256599

It is not full yet, so there is still time to sign up.  Susan King, Sustainability Leader for HED will be showing one of her projects as part of the tour: Lake Street Studios. ... Read more

Thought I'd share this interesting research about something I hadn't considered as another pandemic impact - the use of video in Zoom etc calls vs. audio only. Maybe an excuse to keep your camera off some of the time?

https://www.sciencedaily.com/releases/2021/01/210114134033.htm

MAL

We're looking to add a green wall to our existing offices in NYC. Can anyone please share any good product/vendor recommendations?

We were hoping to use Naava walls, but they seem to have retracted into Europe, as far as I can tell.

Hi All,

We’re planning a conference here in Boston, October 23rd & 24th, focused on Designing for People.  We’re rounding out our speaker lineup and I thought I’d reach out to you all for ideas.  If you had an all-star list of people speaking on Health and Wellness in the Built Environment who would be on that list?  Send me 3 names... Read more

Who else is playing in this year’s #SustainabilityScavengerHunt by BE+!?

Meredith Elbaum and team at Built Environment Plus are launching the second annual hunt this Friday. Teams of up to four people compete over a couple of weeks to complete missions and bring awareness to environmental topics.

It was a lot of fun last year - we... Read more

Our firm was asked by a government client in Canada to update their specifications for concrete to capture low embodied carbon as a performance metric. From the SDL group's knowledge of concrete procurement:

What are the chances of systematically obtaining cement specified with 10% lower carbon intensity? What's viable in the current... Read more