Championing the
Changemakers

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Glazing is by far the most complex single component of our enclosures and it must be climate-tuned to boot. Getting the amount, the location, and the performance attributes of glazing is key to... Read more

I've been asked to author an article on urban heat mitigation, and I wanted to include a plug for the above pilot credit, which I think is a really powerful new addition to LEED. Beyond introducing the "intent" and "credit requirements", I was also hoping to do (2) things within the article:

1) provide some feedback from those who have... Read more

As Editorial Director for BuildingGreen, Tristan Roberts brings a deep commitment to environmental stewardship, a broad knowledge about sustainable design, deep understanding of green building products, and a mastery of all things LEED. A longtime contributor of in-depth feature articles in Environmental Building News and regular reporting on... Read more

Happy New Year! 

I haven't seen this topic come up in the forum, but might have just missed it. 

I'm sure many of you have seen the recent article in Dezeen of Australia banning engineered stone due to links silicosis. Australia bans engineered stone due to silicosis risk (dezeen.com)

We are looking for appropriate... Read more

Hello friends,

We are embarking on calculations to quantify avoided embodied carbon from converting an old school building into a multifamily project and I wanted to vet our methodology with you.

Our idea is to first establish a benchmark for a new replacement multifamily building based on published studies. We have found a few... Read more

This summit was pre-approved for 10 AIA LU|HSWs and 10 GBCI CE hours.

Please complete the survey question to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please check your profile to be sure your... Read more

Hello Hive Mind, 

We are exploring the sustainability attributes (or lack there of) of Pre-Engineered Metal Building Systems (PEMBS). These ubiquitous design-build structures often fly under the radar of green building design; they make up billions of square feet of construction globally and are steadily increasing due to speed of... Read more

General FAQs

Orders, Memberships and Billing

Technical... Read more

Hello Green Gurus,

I am starting some research on municipal incentives offered to developers seeking to achieve sustainability targets and am wondering what you may have come across in your work, including but not limited to achieving Passive House. In my limited research, here are few I have come across to get us started:

Conventional roofs contribute to heat loss, heat islands, and excessive stormwater runoff.

BuildingGreen-Approved Green Roofs

BuildingGreen approves systems with appropriate planting media that can be created from regional materials and may be blended for specific characteristics, such as:

Hello everyone,

We are far too often asked to include parking in our buildings (because why shouldn't the average family have 2.1 kids, .8 pets, and 3 cars) and it always grates on me that we are putting so many resources (natural and monetary) into something that is almost certainly single use and will need to be demolished in 30 years... Read more

Friends,

We put a lot of effort into air tightness design, detailing, and construction administration, often including 6-sided mockup and parital or whole-building blower-door testing.  For commercial buildings, these tests measure air leakage in cfm/sf at 1.57 psf (75pa).  

I came across this research paper several years ago, but... Read more

One week until our AdRESS conference in Houston! Nadav and I hope to see some of you there. Check out the latest announcement.

Good evening,

I am looking for suggestions to replace"wood" siding at the 25-year-old Lyle Center for Regenerative Studies and as always there is no solution that does it all. There seem to be three main options: wood, composition siding, or fiber cement siding. I am looking for something with low embodied carbon, little maintenance,... Read more

Hi,

Has anyone been asked by a client to track welding rods on any projects? We were recently asked to do this. I was asked why the client would ask us to do this. I don't know if it has to do w/ "real property" and is a property tax-related reason, or if it is an environmental/sustainable reason. There is piping associated with the... Read more

Hi everyone,

We're still working to find the optimal time for the SDLS monthly call. We're now looking at the 4th Tuesday of the month. Please fill out this doodle poll to let us know which of these times work for you.

Thank you!

Jen

Remember 2013? LEED version 4 had just been released to the public. Hardly anyone was using it, though—not only because they didn’t have to, but also because there just wasn’t a pathway to achieve many of the new credits in the rating systems. Especially the product-related credits in the Materials & Resources category, along with the Low-... Read more

What general forums do you want (in addition to the Best Practice forums)? On LEEDuser we have "Forum quick links" in the left sidebar that cover general topics:

https://leeduser.buildinggreen.com/forums

For example, you could have:

and any other category that isn't restricted to a... Read more

Successfully managing the LEED documentation process requires specific knowledge, tools, and skills that are not covered in the LEED Reference Manual. This CEU course is based on the LEED Project Management course that GreenStep developed and teaches through UC–Berkeley Extension. It is designed for professionals who are somewhat familiar... Read more